Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

IPv4 Multicast VLAN Traffic Reduction

  • 1 IPv4 Multicast VLAN Traffic Reduction
    • 1.1 IGMP Snooping Overview
      • 1.1.1 Queriers and Non-Queriers
      • 1.1.2 VLAN-Specific Configuration
      • 1.1.3 Tracking and Fast Leave
      • 1.1.4 Support for IGMP Snooping and Layer 3 Multicast Routing Together on the Same Device
      • 1.1.5 Hardware Resources for IGMP and PIM SM Snooping
      • 1.1.6 Configuration Notes and Feature Limitations for IGMP Snooping and Layer 3 Multicast Routing
    • 1.2 IGMP Snooping Configuration
      • 1.2.1 IGMP Snooping Software Resource Limits
      • 1.2.2 IGMP Snooping Mcache Entries and Group Addresses
      • 1.2.3 Setting the Maximum Number of IGMP Mcache Entries and Group Addresses
      • 1.2.4 IGMP Snooping Configuration Notes for Layer 3 Devices
      • 1.2.5 IGMP Snooping Modes
      • 1.2.6 Configuring the IGMP Snooping Mode and Version Globally
      • 1.2.7 Configuring the IGMP Snooping Mode and Version for a VLAN
      • 1.2.8 Configuring IGMP Snooping Global Options
      • 1.2.9 Disabling IGMP Snooping on a VLAN
      • 1.2.10 Disabling Multicast Static Group Forwarding for a VLAN
      • 1.2.11 Configuring Static Router Ports
      • 1.2.12 Turning Off Static Group Proxy
      • 1.2.13 Configuring the Layer 2 Mode IPv4 Querier Address
      • 1.2.14 Enabling IGMPv3 Membership Tracking and Fast Leave for the VLAN
      • 1.2.15 Enabling Fast Leave for IGMPv2
      • 1.2.16 Enabling Fast Convergence
      • 1.2.17 Enabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN
      • 1.2.18 Software Defined Video-over-Ethernet
        • 1.2.18.1 SDVoE Configuration Options
        • 1.2.18.2 Configuring SDVoE using the multicast sdvoe Command
        • 1.2.18.3 Enabling SDVoE where Edge-ports are Automatically Created
        • 1.2.18.4 Configuration Notes and Feature Limitations
        • 1.2.18.5 Displaying SDVoE Information
    • 1.3 Displaying IGMP Snooping Information
    • 1.4 PIM SM Traffic Snooping Overview
      • 1.4.1 Application Examples of PIM SM Traffic Snooping
      • 1.4.2 Configuration Notes and Limitations for PIM SM Snooping
    • 1.5 PIM SM Snooping Configuration
      • 1.5.1 Enabling PIM SM Snooping
      • 1.5.2 Disabling PIM SM Snooping Globally
      • 1.5.3 Enabling PIM SM Snooping on a VLAN
      • 1.5.4 Disabling PIM SM Snooping on a VLAN
    • 1.6 Displaying PIM SM Snooping Information

IPv4 Multicast VLAN Traffic Reduction

In this section:

  1. IGMP Snooping Overview
  2. IGMP Snooping Configuration
  3. Displaying IGMP Snooping Information
    You can use various show commands to view information about IGMP snooping.
  4. PIM SM Traffic Snooping Overview
  5. PIM SM Snooping Configuration
  6. Displaying PIM SM Snooping Information
    You can use various show commands to view information about PIM sparse mode (SM) snooping.

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback