Configuring MSDP for a Specific VRF

You can configure Multicast Source Discovery Protocol (MSDP) for a specific virtual routing forwarding (VRF) instance.
You must configure the VRF before starting this task.

All MSDP parameters available for the default router instance are configurable for a VRF-based MSDP instance.

  1. Enter global configuration mode. 
    device# configure terminal
  2. Enable MSDP for a VRF named blue. 
    device(config)# router msdp vrf blue
  3. Configure an MSDP peer on the VRF. 
    device(config-msdp-router-vrf-blue)# msdp-peer 205.216.162.1

The following example enables MSDP on VRF blue and configures a neighbor as an MSDP peer on the VRF. 

device# configure terminal
device(config)# router msdp vrf blue
device(config-msdp-router-vrf-blue)# msdp-peer 205.216.162.1
Parent topic: Configuring Multicast Source Discovery Protocol