IP Multicast Protocols

• 1 IPv4 Multicast Protocols
  • 1.1 Overview of IP Multicasting
  • 1.2 Layer 3 IPv4 Multicast Scaling Numbers
  • 1.3 Multicast Terms
  • 1.4 Support for Multicast Multi-VRF
  • 1.5 Changing Global IP Multicast Parameters
  • 1.6 Concurrent Support for Multicast Routing and Snooping
  • 1.7 Defining the Maximum Number of PIM Cache Entries
  • 1.8 Setting the Maximum Number of IGMP Group Addresses
  • 1.9 Configuring the IGMP Report Filter Policy
  • 1.10 IPv4 PIM Register Message Rate Limit
    • 1.10.1 Configuring the Register Message Rate Limit for PIM
  • 1.11 IPv4 PIM Register Message Filter Rule
    • 1.11.1 Configuring the Register Message Filter Rule for PIM
  • 1.12 Modifying IGMPv1 and IGMPv2 Parameters
  • 1.13 Adding an Interface to a Multicast Group
  • 1.14 Multicast Non-Stop Routing
  • 1.16 Passive Multicast Route Insertion
  • 1.17 Viewing PMRI Status and Disabling PMRI
  • 1.18 IP Multicast Boundaries
  • 1.19 Configuration Considerations
  • 1.20 Configuring Multicast Boundaries
  • 1.21 Extended ACL to Permit Multicast Traffic
  • 1.22 Extended ACL to Deny Multicast Traffic
  • 1.23 PIM Dense
    • 1.23.1 Initiating PIM Multicasts on a Network
    • 1.23.2 Pruning a Multicast Tree
    • 1.23.3 Grafts to a Multicast Tree
    • 1.23.4 PIM DM Versions
    • 1.23.5 Configuring PIM DM
    • 1.23.6 Enabling PIM Dense
    • 1.23.7 Enabling PIM Dense on a Specific VRF
    • 1.23.8 Modifying PIM Global Options
    • 1.23.9 Configuring the Slow Path Forwarding of IPv4 Multicast Data Packets
    • 1.23.10 Selection of Shortest Path Back to Source
    • 1.23.11 Failover time in a Multi-Path Topology
    • 1.23.12 Configuring a DR Priority
  • 1.24 PIM Convergence on MAC Address Movement
  • 1.25 PIM Sparse
    • 1.25.1 PIM Sparse Device Types
    • 1.25.2 RP Paths and SPT Paths
    • 1.25.3 Configuring PIM Sparse
      • 1.25.3.1 Current Limitations
      • 1.25.3.2 Enabling PIM Sparse
      • 1.25.3.3 Enabling PIM Sparse on a Specific VRF
      • 1.25.3.4 Configuring BSRs and RPs for PIM Sparse
      • 1.25.3.5 Updating PIM-Sparse Forwarding Entries with New RP Static Configuration
    • 1.25.4 ACL-based RP Assignment
      • 1.25.4.1 Configuring an ACL-based RP Assignment
  • 1.26 IP Multicast PIM Neighbor Filter
    • 1.26.1 Configuring IPv4 PIM Neighbor Filtering
  • 1.27 PIM Passive
  • 1.28 Multicast Outgoing Interface (OIF) List Optimization
  • 1.29 Clearing the PIM Forwarding Cache
  • 1.30 Clearing the PIM Message Counters
  • 1.31 Configuring Multicast Source Discovery Protocol
    • 1.31.1 Peer Reverse Path Forwarding Flooding
    • 1.31.2 Source Active Caching
    • 1.31.3 Configuring MSDP Globally
    • 1.31.4 Configuring MSDP for a Specific VRF
    • 1.31.5 Disabling an MSDP Peer
    • 1.31.6 Designating the Interface IP Address as the RP IP Address
    • 1.31.7 Filtering MSDP Source-Group Pairs
    • 1.31.8 Filtering Incoming and Outgoing Source-Active Messages
    • 1.31.9 Filtering Advertised Source-Active Messages
    • 1.31.10 Displaying MSDP Information
    • 1.31.11 Clearing MSDP Information
  • 1.32 Configuring MSDP Mesh Groups
    • 1.32.1 Configuring MSDP Mesh Group Example
  • 1.33 MSDP Anycast RP
    • 1.33.1 MSDP Anycast RP Configuration
    • 1.33.2 Configuring MSDP Anycast RP Example
  • 1.34 PIM Anycast RP
    • 1.34.1 Configuring PIM Anycast RP
  • 1.35 IPv4 PIM Join and Prune Policy
    • 1.35.1 Configuring IPv4 PIM Join and Prune Policy
  • 1.36 Displaying PIM Information
  • 1.37 Static Multicast Routes
  • 1.38 IGMP Proxy
    • 1.38.1 IGMP Proxy Configuration Notes
    • 1.38.2 IGMP Proxy Limitations
    • 1.38.3 Configuring IGMP Proxy
    • 1.38.4 Filtering Groups in Proxy Report Messages
    • 1.38.5 Displaying IGMP Proxy Information
  • 1.39 IGMPv3
    • 1.39.1 Default IGMP Version
    • 1.39.2 Compatibility with IGMPv1 and IGMPv2
    • 1.39.3 Enabling the IGMP Version Globally
    • 1.39.4 Enabling the IGMP Version for a Specific Interface
    • 1.39.5 Enabling the IGMP Version for Specific Ports Within a Virtual Routing Interface
    • 1.39.6 Enabling Membership Tracking and Fast Leave
    • 1.39.7 Creating a Static IGMP Group
    • 1.39.8 Configuring IGMP Routing Global Options
    • 1.39.9 Displaying IGMPv3 Information
    • 1.39.10 Clearing IGMP Traffic Statistics and the IGMP Group Membership Table
    • 1.39.11 Source-Specific Multicast
      • 1.39.11.1 IGMPv3 and Source-Specific Multicast Protocols
      • 1.39.11.2 Configuring PIM SSM Group Ranges
    • 1.39.12 IGMPv2 SSM Mapping
      • 1.39.12.1 Configuring an ACL for IGMPv2 SSM Mapping
      • 1.39.12.2 Configuring IGMPv2 SSM Mapping
      • 1.39.12.3 Displaying an IGMP SSM Mapping Information