Configuring IGMP Proxy

Perform the following steps to configure IGMP Proxy from global configuration mode.

  1. Configure PIM globally on the router device. 
    device(config)# router pim
  2. Configure an interface (physical, virtual routing, or tunnel interface) that will serve as the IGMP proxy for an upstream device. 
    device(config)# interface ethernet 1/1/3
  3. Configure an IP address on Ethernet interface 1/1/3. 
    device(config-if-e1000-1/1/3)# ip address 10.95.5.1/24
  4. Enable PIM in passive mode on the interface. 
    device(config-if-e1000-1/1/3)# ip pim passive
  5. Enable IGMP Proxy on the interface. 
    device(config-if-e1000-1/1/3)# ip igmp proxy
Parent topic: IGMP Proxy