show pstat dump
Displays the contents of the CPU queue and port status.
Parameters
Modes
User EXEC mode
Priviled EXEC mode
Global configuration mode
Examples
The following example shows output for the
show pstat dump command for stack unit 2.
device# show pstat dump 2
COS-Q Config Details - Rate Limit & Packet Type
COS-Q | pps | Burst | PKT-TYPE |
0 | 1000 | 200 | Prio-0 / Default |
1 | 750 | 500 | Prio-1 |
2 | 1000 | 1000 | Prio-2 / NHOP(IP) |
3 | 3000 | 500 | Prio-3 |
4 | 3000 | 1000 | Prio-4 / L3/MC control |
5 | 3000 | 1000 | Prio-5 / L3 control |
6 | 4000 | 1000 | Prio-6 / L2 control / VRRP |
7 | 4000 | 2000 | Prio-7 / SPX/Stacking control |
8 | 3000 | 1000 | Prio-12 (STK LOW PRI) |
9 | 4000 | 3000 | Prio-13 (STK MED PRI) |
10 | 1000 | 1000 | UDLD |
11 | 50 | 250 | NONE |
12 | 750 | 500 | MCAST MISS/IPMCAST MISS |
13 | 100 | 5000 | SFLOW (SRC & DEST) |
14 | 500 | 200 | Openflow |
15 | 10 | 10 | Bicast |
16 | 1024 | 2048 | FlexAuth |
17 | 10 | 10 | NONE |
18 | 10 | 10 | NONE |
19 | 10 | 10 | L2 MOVE |
20 | 5000 | 3000 | Prio-14 (STK HIGH PRI) |
Hardware COS-Q Counters
COS-Q | PKTS | PKTS-DROP |
0 | 0 | 0 |
1 | 0 | 0 |
2 | 0 | 0 |
3 | 0 | 0 |
4 | 0 | 0 |
5 | 0 | 0 |
6 | 0 | 0 |
7 | 0 | 0 |
8 | 0 | 0 |
9 | 0 | 0 |
10 | 0 | 0 |
11 | 0 | 0 |
12 | 0 | 0 |
13 | 0 | 0 |
14 | 0 | 0 |
15 | 0 | 0 |
16 | 0 | 0 |
17 | 0 | 0 |
18 | 0 | 0 |
19 | 0 | 0 |
20 | 0 | 0 |
Software Q Counters.
COS-Q PKTS | APP-Q PKTS | Tx Rx Rx-Drop In-Q
0 0 | 10 0 | 0 0 0 0
1 0 | 9 0 | 0 0 0 0
2 0 | 8 0 | 0 0 0 0
3 0 | 7 0 | 0 0 0 0
4 0 | 6 0 | 0 0 0 0
5 0 | 5 0 | 0 0 0 0
6 0 | 4 0 | 0 0 0 0
7 0 | 1 0 | 0 0 0 0
8 0 | 3 0 | 0 0 0 0
9 0 | 2 0 | 0 0 0 0
10 0 | 1 0 | 0 0 0 0
11 0 | 20 0 | 0 0 0 0
12 0 | 12 0 | 0 0 0 0
13 0 | 13 0 | 0 0 0 0
14 0 | 14 0 | 0 0 0 0
15 0 | 15 0 | 0 0 0 0
16 0 | 16 0 | 0 0 0 0
17 0 | 17 0 | 0 0 0 0
18 0 | 18 0 | 0 0 0 0
19 0 | 19 0 | 0 0 0 0
20 0 | 0 0 | 0 0 0 0
Pkts Processed: 0, Total Pkts dropped (AppQ-full): 0
Port Counters.
PORT | COUNT-BCM | COUNT-APP | DROP |
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |