show issu status
Privileged EXEC mode
Use this command to show the ISSU status before or during an upgrade.
Output for a successful upgrade in progress.
device# show issu status ISSU Status: In Progress Upgrade State: UNIT JOIN Upgrade Option: issu primary ID Type Role State 1 ICX7450-32ZP member UPGRADING 3 ICX7450-32ZP member UPGRADE PENDING 4 ICX7450-32ZP active UPGRADE PENDING
Output of the command when errors are encountered.
device# show issu status ISSU Status: Aborted Upgrade State: UPGRADE ABORT Upgrade Option: issu primary Reason for Abort: UNABLE TO UPGRADE ID Type Role State 1 ICX7450-32ZP member UPGRADE ABORT 3 ICX7450-32ZP standby UPGRADE PENDING 4 ICX7450-32ZP active UPGRADE PENDING
If a manual abort is done or ISSU detects an abort condition (with ISSU started with
the no
on-error option), the stack is left as it is and a manual recovery is required by running
either the
reload-primary or
reload-secondary command.
If an upgrade is not in progress, this command displays information about whether the system is ready for an upgrade.
device# show issu status Topology is Ring Yes Standby Present Yes Standby ready for upgrade Yes Flash use in progress No Secure Setup in progress No ISSU in progress or aborted No Election pending No Election in progress No Reload pending No CPU utilization high No All units in ready state Yes Primary Image is upgrade compatible Yes Secondary Image is upgrade compatible Yes Startup config and Running Config Same Yes User in Config mode No System ready for issu ISSU not in progress
If an upgrade is completed, this command displays the following information,
device# show issu status Last upgrade time 00:02:19.367 GMT+00 Tue Mar 20 2016 The older image before-ISSU SPR08050b433.bin Topology is Ring Yes Standby Present Yes Standby ready for upgrade Yes Flash use in progress No Secure Setup in progress No ISSU in progress or aborted No Election pending No Election in progress No Reload pending No CPU utilization high No All units in ready state Yes Primary Image is upgrade compatible Yes Secondary Image is upgrade compatible Yes Startup config and Running Config Same Yes User in Config mode No System ready for issu ISSU not in progress
| Release version | Command history |
|---|---|
| 08.0.50 | This command was introduced. |
| 08.0.70 | Support for Campus Fabric (SPX) systems was added. (Note: FastIron 9.0.00 and later releases do not support Campus Fabric.) |