-
overlay-gateway
Last Updated
Sep 03, 2026
. Maximum length is 64 characters. Global configuration mode The no form of the command removes the gateway configuration. The command is supported on ICX 7650 and ICX 7850 devices. Only one virtual extended LAN (VXLAN) overlay-gateway is supported. Overlay-gateways support IPv4 tunnels only. The overlay
-
site (VXLAN)
Last Updated
Sep 03, 2026
7550, ICX 7650, and ICX 7850 devices. A maximum of 32 remote sites can be configured. For each remote site, you must configure one primary IP address and up to 15 secondary IP addresses in site configuration mode. In site configuration mode, you must also extend the mapped VLAN to the site. To
-
Setting the clock parameters for the device
Last Updated
Sep 03, 2026
in Real Time Clock(RTC) register even when power is removed from the device. However, ICX 7150 and ICX 7650 do not have this capability because they were designed without RTC battery, therefore they do not retain clock date and time in case of power outage. To avoid this, you should configure NTP
-
System-Max Changes and uRPF
Last Updated
Sep 03, 2026
Reference and the "Configuration Fundamentals" chapter in the RUCKUS FastIron Management Configuration Guide for more information. ICX 7750 and ICX 7650 system-max Values Without uRPF Configuration System Parameter Default Maximum Current Configured ip-route 98304 131072 98304 98304 ip6-route 5120
-
SPX configuration unit table
Last Updated
Sep 03, 2026
7250, Brocade ICX 7450, RUCKUS ICX 7650 and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXConfigUnitTable brcdIp.1.1.3.40.2.1 Not-accessible 802.1BR SPX configuration unit table. brcdSPXConfigUnitIndex brcdIp.1.1.3.40.2.1.1.1 Syntax: Integer32 Not-accessible The SPX unit
-
SPX global scalar MIB objects
Last Updated
Sep 03, 2026
SPX global scalar MIB objects SPX global scalar MIB objects SPX global scalar MIB objects The following Switch Port Extender (SPX) global scalar objects are supported on the Ruckus ICX 7150, Brocade ICX 7250, Brocade ICX 7450, RUCKUS ICX 7650 or Brocade ICX 7750 devices depending on the role of the
-
Checking the Cloud Connection Status
Last Updated
Sep 03, 2026
Checking the Cloud Connection Status Checking the Cloud Connection Status Checking the Cloud Connection Status ICX 7150, ICX 7650, and ICX 7850 switches have an LED that indicates when the device is managed from the cloud. The following table interprets the LED status. Refer to the FastIron
-
Enabling priority flow control on multiple ports
Last Updated
Sep 03, 2026
Enabling priority flow control on multiple ports Enabling priority flow control on multiple ports Enabling priority flow control on multiple ports Follow these steps to enable PFC on multiple ports. PFC is supported only on RUCKUS ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX
-
Last Updated
Aug 25, 2026
RUCKUS ICX Switches
Product Guides
Administer and Manage
................................................................................................................................................... 12 Upgrading from FastIron 08.0.70 or Earlier to 09.0.10a or Later for the ICX 7650.................................................................................................. 13
-
Scenario 2 - Using Zero-touch Provisioning to Configure a Stack
Last Updated
Sep 03, 2026
devices, with the exception of the active controller. Clean devices do not contain any configuration information. An ICX 7650 device with startup-config flash using 40-Gbps stacking ports but no other configuration is treated as a clean unit. Because an ICX 7650 device that uses 40-Gbps stacking