Search Results: "icx 7550"

(A-D) route. 2: MAC/IP advertisement route. 3: Inclusive Multicast Ethernet Tag (IMET) route. 4: Ethernet Segment route. 5: IP Prefix route This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes the configured EVPN route type for the route map

is from 0 through 3. Global configuration mode This command is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7850 devices. This command is supported for RUCKUS ICX 7550 and ICX 7850 devices only. To enable global PFC, symmetrical flow control (SFC) must be disabled. You must enable PFC

for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. The no form of the command disables the range of mapped VLANs over a VXLAN overlay gateway. The following example extends a range of mapped VLANs (VLAN 200 through VLAN 300) over a VXLAN

ICX 7550 4000 64000 ICX 7650 8192 64000 ICX 7750 8192 64000 ICX 7850 8192 64000 ICX 8100 2048 8192 ICX 8200 2048 8192 The no form of the command resets the number of allowable static ARP table entries to the default value. The following example increases the maximum number of ARP table entries you

devices. number The maximum number of routes in the IP route table. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new

7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The maximum and minimum number of IPv6 routes

for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. The no form of the command disables the range of mapped VLANs over a VXLAN overlay gateway. The following example extends a range of mapped VLANs (VLAN 200 through VLAN 300) over a VXLAN

that can run the same software versions but have different functional capabilities. The ICX 7550, ICX 7650, and ICX 7850 devices can run the same software versions although some of their capabilities are different. If these devices are used as MCT peers, some basic MCT functionality, such as the MAC

space for IPv4 routing information, you must configure the TCAM space manually. For ICX 7550, ICX 7850, ICX 8100, and ICX 8200 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied

ICX 7550 4000 64000 ICX 7650 8192 64000 ICX 7750 8192 64000 ICX 7850 8192 64000 The no form of the command resets the number of allowable static ARP table entries to the default value. The following example increases the maximum number of ARP table entries you can configure to 32000. device# configure terminal device(config)# system-max ip-arp 32000 device(config)# write memory device(config)# end device# reload