⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Search Results: "icx 7650"

Showing 671 - 680 of 1,349 results

Relevance: best match to your search term first.

  • System-Max Changes and uRPF

    Last Updated Sep 03, 2026

    Fundamentals" chapter in the RUCKUS FastIron Management Configuration Guide for more information. ICX 7650 system-max Values Without uRPF Configuration System Parameter Default Maximum Current Configured ip-route 98304 131072 98304 98304 ip6-route 5120 7168 5120 5120 ip-route-default-vrf 65536 131072 65536 65536 ip6-route-default-vrf 2048 7168 2048 2048 ip-route-vrf 4096 131072 4096 4096 ip6-route-vrf 1024 7168 1024 1024

  • Static ARP

    RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.10

    Last Updated Sep 03, 2026

    device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048

  • Static ARP

    Last Updated Sep 03, 2026

    device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024

  • Specifying IPv6 SNMP Parameters

    Last Updated Sep 03, 2026

    IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850.

  • Enabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN

    Last Updated Sep 03, 2026

    . Enabling the flooding of unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN is supported on the following platforms: RUCKUS ICX 8100 (standalone) RUCKUS ICX 8200 (standalone and stacking) RUCKUS ICX 7850 (MCT, standalone, and stacking) RUCKUS ICX 7650 (MCT, standalone, and stacking

  • Allocating Memory for More VLANs or Associated Ports

    Last Updated Sep 03, 2026

    ports (VPORTs) supported on your product depends on the device. The following table lists the default and configurable maximum numbers of VLANs and VPORTs. A minimum value of 5 must be configured when configuring system-max vlan. VLAN and VPORT Support for ICX 7150, ICX 7550, ICX 7650, ICX 7850, ICX

  • ipv6 multicast per-vlan filter-to-cpu

    Last Updated Sep 03, 2026

    filtering to the CPU for a VLAN is disabled.. Global configuration mode The command is applicable for ICX 7650 and ICX 7750 devices only. After using this command a reload may be required. If a reload is required, this requirement appears after the command is executed. The no form of the command

  • Specifying IPv6 SNMP Parameters

    Last Updated Sep 03, 2026

    IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# snmp-client ipv6 2001:DB8:89::23 device(config)# snmp-server trap-source ethernet 1/2/1 device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850

  • Enabling priority flow control for a single priority group

    Last Updated Sep 03, 2026

    ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices do not support PFC. Enter global configuration mode. device# configure terminal Enable PFC for PG 1. device(config)# priority-flow-control 1 There are four PGs numbered from 0 through 3. Return to privileged EXEC mode. device

  • Static ARP

    Last Updated Sep 03, 2026

    device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024