-
Configuring the share level for an ingress buffer profile
Last Updated
Sep 03, 2026
buffers that a priority group (PG) can use as a portion of the of the total sharing pool. Configuration of the ingress buffer share level is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7850 devices. Enter global configuration mode. device# configure terminal Configure the share level. device
-
SPX configuration CB SPX port table
Last Updated
Sep 03, 2026
SPX configuration CB SPX port table SPX configuration CB SPX port table SPX configuration CB SPX port table The following MIB objects configure CB SPX ports for CB units. The following table objects are supported only on the Ruckus ICX 7150, Brocade ICX 7250, Brocade ICX 7450, RUCKUS ICX 7650 and
-
RUCKUS ICX Switch Port Extender Deployment Guide
Last Updated
Sep 02, 2026
Scaling (Supported Topologies) Scaling (Supported Topologies) Scaling (Supported Topologies) Scaled Topology Including SPX (PE) Ring and PE Chains Scalability Limits 4 CB stack units (ICX 7750) 36 PE units (ICX 7450, ICX 7250, and ICX 7150) 6 PE units per chain cascade depth 1500 PE ports 4 VLANs
-
Configuring the share level for an ingress buffer profile
Last Updated
Sep 03, 2026
buffers that a priority group (PG) can use as a portion of the of the total sharing pool. Configuration of the ingress buffer share level is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7750 devices. Enter global configuration mode. device# configure terminal Configure the share level. device
-
mka-cfg-group
Last Updated
Sep 03, 2026
Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650 and ICX 7850 devices. The no form
-
mka-cfg-group
Last Updated
Sep 03, 2026
Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650 and ICX 7850 devices. The no form
-
spx pe-enable
Last Updated
Sep 03, 2026
error because spx pe-enable is not configured in the startup file. A device cannot be enabled as a PE if stacking is enabled on the unit. The command is available only on an ICX 7450 router. A standalone unit switches between regular and Provisional-PE mode immediately when spx pe-enable is
-
lldp advertise port-id-subtype
Last Updated
Sep 03, 2026
ethernet 1/2/2), or you can combine a range with a list (for example, ethernet 1/1/1 to ethernet 1/1/4 ethernet 1/1/1 ethernet 1/1/2). Global configuration mode The port ID subtype to advertise is only configurable on ICX 7750, ICX 7450, and ICX 7250 devices. The port ID subtype to advertise is only
-
set ip next-hop
Last Updated
Sep 03, 2026
default VRF of the interface is considered. The next hop in a route map will take effect only if the interface on which the route map is applied and the next hop in the route map are in the same VRF The no-ttl-decrement option is supported only on ICX 7750 and ICX 7450 devices. The no-ttl-decrement
-
spx pe-enable
Last Updated
Sep 03, 2026
error because spx pe-enable is not configured in the startup file. A device cannot be enabled as a PE if stacking is enabled on the unit. The command is available only on an ICX 7450 router. A standalone unit switches between regular and Provisional-PE mode immediately when spx pe-enable is