-
Layer 2 Scaling
Last Updated
Sep 03, 2026
Layer 2 Scaling Layer 2 Scaling Layer 2 Scaling ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 MAC Table Size/L2 lookups 16,384 ~16,000 Profile 1: ~16,000 Profile 2: ~114,000 Profile 3: ~32,000 Router: ~80,000 Switch: ~80,000 Profile 1: ~32,000 Profile 2: ~290,000 Profile 3
-
Configuring a Port to the Egress Queue Drop Counters
Last Updated
Sep 03, 2026
configure the device to monitor a different port for packet drops. On the ICX 7550, ICX 7650, ICX 7850, ICX 8100, and ICX 8200 devices, each port has its own set of drop counters. This task is supported only on the ICX 7150 and ICX 7150-ES models. Perform the following steps to configure a port that the
-
MAC ACL Configuration Notes and Limitations
Last Updated
Sep 03, 2026
, on RUCKUS ICX 8100 and ICX 8200 devices, 31 entries are reserved. MAC ACL filtering on RUCKUS ICX devices is performed in hardware. On RUCKUS ICX devices, MAC ACLs can match on source and destination MAC addresses and Ethertype. MAC ACLs do not filter Layer 2 control protocols. Layer 2 control
-
BGP4 - IPV4 Border Gateway Protocol
Last Updated
Sep 03, 2026
BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 BGP4 08.0.95 08.0.70 08.0.90 No 10.0.20a BGP4 Graceful Restart 08.0.95 08.0.70 08.0.90 No 10.0.20a BGP4 Graceful Restart helper mode
-
PoE/PoE+ - Power over Ethernet
Last Updated
Sep 03, 2026
PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature Legacy inline power is not supported in 4-pair PoE ports. ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Auto PoE firmware upgrade 08.0.70 10.0.10d 08.0.95 08.0.70 No 10.0.10f
-
IPv6 PIM Convergence on MAC Address Movement
Last Updated
Sep 03, 2026
7550, ICX 7650, ICX 7850, and ICX 8200 devices. IPv6 PIM convergence on MAC address movement is applicable only when the multicast source and IPv6 PIM routers are in the same Layer 2 domain.
-
Disabling or Re-Enabling DHCP Option 37 (DHCP-Relay Information) Processing on an Interface
Last Updated
Sep 03, 2026
option 37 is enabled on a VLAN, DHCP packets received on all member ports of the VLAN are subject to DHCP option 37 processing. You can disable or re-enable this processing on one or more member ports of the VLAN. The dhcp6-relay information enable command is supported only on ICX 8200 devices. To
-
system-max mld-snoop-group-addr
Last Updated
Sep 03, 2026
. For ICX 7650 devices, valid values range from 256 through 8000. For ICX 7150 devices, valid values range from 256 through 3072. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values
-
system-max ip-static-arp
Last Updated
Sep 03, 2026
7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum
-
Last Updated
Sep 03, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy, Administer and Manage, Monitor and Report
-topology Trunk on a Two-unit ICX 7850 Stack in a Live Environment Creating a Linear-topology Trunk on a Two-unit ICX 7850 Stack in a Live Environment Manually Creating a Two-unit ICX 7850 Stack with a Ring Topology Manually Creating a Two-unit ICX 7850 Stack with a Ring Topology ICX 8200 Stack