⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Search Results: "icx 7750"

Showing 521 - 530 of 869 results

Relevance: best match to your search term first.

  • age

    Last Updated Sep 03, 2026

    greater of the two values. If you set the age timer to 3 minutes for the port, and 10 minutes for the device, the port MAC address aging occurs in 10 minutes (the device-level setting), which is greater than the port setting that you have configured. On the ICX 7750, the port security age can only be

  • symmetrical-flow-control enable

    Last Updated Sep 03, 2026

    commands in interface configuration mode. In FastIron Release 08.0.20 and later releases, SFC is not supported for ports across stack units in ICX 7750 devices or across stack units or for ports across master and slave packet-processor (pp) devices in ICX7450-48 units. The following example shows how to

  • optical-monitor

    Last Updated Sep 03, 2026

    no optical-monitor non-ruckus-optic-enable Optical transceivers are not monitored. alarm-interval Specifies the interval at which alarms and warning messages are sent. The default and minimum timer for ICX 7450, ICX 7550, ICX 7650, RUCKUS ICX 7750, and ICX 7850 devices is 8 minutes. The default

  • priority-flow-control enable

    Last Updated Sep 03, 2026

    configuration mode This command is supported only on Ruckus ICX 7250 ICX 7750, and ICX 7450 devices. This command is not supported on Ruckus ICX 7150 or ICX 7650 devices. To enable global PFC, symmetrical-flow-control (SFC) must be disabled. You must enable PFC globally before you configure it for

  • show bfd

    Last Updated Sep 03, 2026

    show bfd show bfd show bfd Displays Bidirectional Forwarding Detection (BFD) information. show bfd User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The show bfd command displays the following information: Output Field Description BFD State Specifies whether BFD is

  • Configuring Breakout Ports and Sub-Ports

    Last Updated Sep 03, 2026

    -issued and the resulting configuration must be saved and reloaded before the four 10 Gbps sub-ports are created. If the ICX 7750 device is in cut-through mode and you attempt to configure breakout, an error is returned. Cut-through must be disabled to return the unit to store-and-forward mode before

  • Configuring the CB

    RUCKUS ICX Switch Port Extender Deployment Guide

    Last Updated Sep 02, 2026

    Configuring the CB Configuring the CB Configuring the CB Enable SPX on the ICX 7750. Configure spx cb-enable on the active CB unit. The spx cb-enable command adds "lldp run" to the running configuration in FastIron 08.0.40 and earlier. LLDP then runs on all CB ports. If STP is enabled, the system

  • Configuring the share port level for an egress buffer profile

    Last Updated Sep 03, 2026

    portion of the total memory. The configuration of the egress buffer share port level is supported only on the RUCKUS ICX 7150. For the RUCKUS ICX 7250, ICX 7450, ICX 7650, ICX 7750, ICX 7850, and ICX 7550 devices, you can change the queue share level for an individual queue which has a finer

  • Metering

    Last Updated Sep 03, 2026

    . Metering Capabilities Supported for Metering Features Feature On RUCKUS ICX devices Maximum meter available in the system 1024 Band types (bitmap) DROP Capabilities (bitmap) KBPS, BURST, STATS Maximum number of band per meter 1 or 2 2 is supported on the ICX 7750 Maximum color value 2

  • RUCKUS FastIron Stacking Configuration Guide, 08.0.61

    Last Updated Aug 20, 2026 RUCKUS ICX Switches Product Guides Configure and Deploy

    ..........................................................................................................................................87 ICX 7750 stack configuration overview