Search Results: "icx 7450"

Configuring Multi-VRF Configuring Multi-VRF Configuring Multi-VRF Multi-VRF Configuring VRF system-max values Use this example procedure to modify the default system-max values to accommodate Multi-VRF on a Ruckus ICX 7450. Creating VLANs as links on a tagged port for security Configuring a VRF

configured for the VTI. ipsec-profile-name Specifies the name of the IPsec profile to secure packets that go out on this interface. Interface configuration mode Before executing this command, the tunnel mode must be set to ipsec by using the tunnel mode ipsec command. IPsec is supported only on ICX

IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850.

IPv4 Multicast Routing IPv4 Multicast Routing IPv4 Multicast Routing Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Passive multicast route insertion (PMRI) 8.0.61 8.0.40 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 IP Multicast Boundaries 8.0.61 8.0.40 8.0.20 8.0.95 8.0.70 8.0.10

LAG - Link Aggregation Group LAG - Link Aggregation Group LAG - Link Aggregation Group For considerations related to LAGs in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 LAG

Rate Limiting and Shaping Rate Limiting and Shaping Rate Limiting and Shaping Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Inbound rate limiting (port-based rate limiting on inbound ports) Not supported in an 802.1br (SPX) configuration. Not supported in an 802.1br (SPX

Authentication, Authorization, and Accounting Authentication, Authorization, and Accounting Authentication, Authorization, and Accounting Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Authentication, Authorization, and Accounting 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90

VLAN - Virtual LAN VLAN - Virtual LAN VLAN - Virtual LAN For considerations related to VLANs in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 VLAN 8.0.60 8.0.30 8.0.20 8.0.95

all IPMC entry optimization is disabled by default on and ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. IPMC entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global

EXEC level. To remove a license file, use the license delete command. The unit unit_id parameter is used only on ICX 7450 devices when copying a license file to a specific unit id. If you attempt to download the same license twice on the device, the following error message is displayed on the console