-
RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.20
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048
-
System-Max Changes and uRPF
Last Updated
Sep 03, 2026
System-Max Changes and uRPF System-Max Changes and uRPF System-Max Changes and uRPF The following tables describe the system-max values with and without uRPF configured on the device. Note that the values with uRPF configuration after reload are reduced by half. uRPF is not supported on ICX 8200 devices
-
RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.10
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048
-
Displaying DHCP Option 82 (dhcp-relay information) Information
Last Updated
Sep 03, 2026
information command is supported only on ICX 8200 devices. Use one of the following commands to view DHCP option 82 processing. Enter the show running-config command for a specific VLAN to display information about the Circuit ID, Remote ID, and forwarding policy for DHCP Option 82. device# show
-
NTP Server Start Delay
Last Updated
Sep 03, 2026
server, as well as a client. This should be done immediately after enabling NTP. The following task enables the NTP client and server mode and delays the NTP server response. NTP Server Start Delay is not supported on RUCKUS ICX 8100 and ICX 8200 devices. Enter global configuration mode. device
-
NTP Server Start Delay
Last Updated
Sep 03, 2026
server, as well as a client. This should be done immediately after enabling NTP. The following task enables the NTP client and server mode and delays the NTP server response. NTP Server Start Delay is not supported on RUCKUS ICX 8100 and ICX 8200 devices. Enter global configuration mode. device
-
NTP over Management VRF Limitations
Last Updated
Sep 03, 2026
NTP over Management VRF Limitations NTP over Management VRF Limitations NTP over Management VRF Limitations Be aware of the following limitations before implementing NTP over Management VRF. NTP over Management VRF is not supported on ICX 7150 and ICX 8200 devices. The communication channel between
-
Viewing the Serial Number of the Device
Last Updated
Sep 03, 2026
an ICX 8200 unit. device# show version Copyright (c) Ruckus Networks, Inc. All rights reserved. UNIT 1: compiled on Jun 12 2022 at 11:04:06 labeled as RDR10000_b250 (80954784 bytes) from Primary RDR10000_b250.bin (UFI) SW: Version 10.0.00_b250T253 Compressed Primary Boot Code size = 1573376, Version
-
Viewing the Serial Number of the Device
Last Updated
Sep 03, 2026
an ICX 8200 unit. device# show version Copyright (c) Ruckus Networks, Inc. All rights reserved. UNIT 1: compiled on Jun 12 2022 at 11:04:06 labeled as RDR10000_b250 (80954784 bytes) from Primary RDR10000_b250.bin (UFI) SW: Version 10.0.00_b250T253 Compressed Primary Boot Code size = 1573376, Version
-
Specifying IPv6 SNMP Parameters
Last Updated
Sep 03, 2026
IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7550, ICX 7650, ICX 7850, and ICX 8200.