Search Results: "icx 8200"

outlined in the following table: Recommended Number of Entries for RUCKUS ICX Devices Devices Recommended Maximum Number of IPSGv6 Entries Per Device RUCKUS ICX 7150 90 RUCKUS ICX 7550 2048 RUCKUS ICX 7650 2048 RUCKUS ICX 7850 1536 RUCKUS ICX 8100 512 RUCKUS ICX 8200 512 The recommended maximum number of

for more information. VXLAN: Virtual Extensible Local Area Network Requirements Anycast gateway with VXLAN is supported on all RUCKUS ICX platforms, except ICX 8200. Considerations Anycast gateway with VXLAN is disabled by default. The current anycast gateway with VXLAN method supported is manual MAC

command is supported on ICX 8200 and ICX 7150 devices. The command displays PoD license configuration for all ports in a stack unit. The command is supported on Brocade ICX 7250 and Ruckus ICX 7150devices. The default license on ICX 8200 devices is 25G. The default license on ICX 7150 devices is 1G. PoD

16 128 128 ICX 7750 16 128 128 ICX 8200 4 16 16 The no form of the command resets the VRF instance to the default value. The following example configures the maximum number of VRF instance as 20. device(config)# system-max ip-vrf 20 device(config)# write memory device(config)# end

are 20 through 10000000 kbps. Global configuration mode Interface configuration mode This command is supported for RUCKUS ICX 8200 and ICX 8100 devices only. The no form of the command resets the ICX device to the default. The following example configures ICMP ping-to-CPU rate limiting at the global

profile. The following example sets the destination IP address in ERSPAN profile 3. device# configure terminal device(config)# monitor-profile 3 type ERSPAN device(config-monitor-profile 3)# destination-ip 1.1.1.1 device(config-monitor-profile 3)# exit Release version Command history 08.0.40 This command was introduced. 10.0.10h_cd1 This command is supported for ICX 8200 devices.

the number of such packets or bytes that are flooded on the VLAN to other devices. The maximum number of interfaces on which BUM Rate Limit can be configured is 512. RUCKUS ICX devices support byte-based and packet-based rate limiting. For ICX 8100 and ICX 8200 devices, the packets-per-second rate limiting uses increments of 125.

Dropping Suspicious ARP Packets Dropping Suspicious ARP Packets Dropping Suspicious ARP Packets On ICX 8200 switches, the following commands can be entered in global configuration mode to drop suspect, malformed ARP packets that may indicate a DDoS attack. To drop all malformed ARP packets, use the

OpenFlow Scaling OpenFlow Scaling OpenFlow Scaling ICX 7150 ICX 7650 ICX 7850 ICX 8200 Total number of flows per system 12,288 ~12,000 12,288 12,288 Total number of flows in Layer 2 mode per unit 74 512 1,472 200 Total number of flows in Layer 3 mode per unit IPv4: 73 IPv6: 256 IPv4: 1,536 IPv6

BGP4+ Scaling BGP4+ Scaling BGP4+ Scaling ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 VRF Instances with BGP4 Configured N/A N/A 32 64 64 N/A N/A BGP4+ Routes (Unique Under default VRF) N/A N/A As per forwarding profile configs ~7,000 As per forwarding profile configs N/A N/A