Search Results: "icx 7750"

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

site. Overlay-gateway site configuration mode The no form of the command removes the extended VLAN configuration. The command is supported only on ICX 7750 devices. The VLAN must already be mapped to a VNI before it is extended over the gateway. The following example sets VLAN 10 to be extended over

the next port in the LAG. all Specifies that failover is to be enabled or disabled on all ports in the LAG. Dynamic LAG configuration mode The no form of this command disables LAG hardware failover. LAG hardware failover is supported only on Ruckus ICX 7750 devices. The following example enables LAG

on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command disables hardware entry optimization for Layer 2 IPv4

configuration mode The no form of the command removes the configured loopback interface as overlay-gateway source interface. The command is supported only on ICX 7750 devices. The loopback interface must be configured prior to use in the overlay-gateway configuration. The loopback interface cannot belong

the default. The following example changes the value for the capacity of the MAC address table to 20000. device# configure terminal device(config)# system-max mac 20000 Release Command History 08.0.40 The command is not valid as you cannot change the number in ICX 7750, ICX 7450, and ICX 7250 devices.

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is