Search Results: "icx 7750"

SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 SNMP v1, v2, and v3 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 Community strings 8.0.60 8.0.30

ARP - Address Resolution Protocol ARP - Address Resolution Protocol ARP - Address Resolution Protocol For considerations related to ARP in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX

Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Virtual Router Redundancy Protocol (VRRP) 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 VRRP timer scaling 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 VRRP Extended (VRRP-E) 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90

site. Overlay-gateway site configuration mode The no form of the command removes the extended VLAN configuration. The command is supported only on ICX 7750 devices. The VLAN must already be mapped to a VNI before it is extended over the gateway. The following example sets VLAN 10 to be extended over

the next port in the LAG. all Specifies that failover is to be enabled or disabled on all ports in the LAG. Dynamic LAG configuration mode The no form of this command disables LAG hardware failover. LAG hardware failover is supported only on Ruckus ICX 7750 devices. The following example enables LAG

configuration mode The no form of the command removes the configured loopback interface as overlay-gateway source interface. The command is supported only on ICX 7750 devices. The loopback interface must be configured prior to use in the overlay-gateway configuration. The loopback interface cannot belong

on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. IPMC entry optimization is enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no

the default. The following example changes the value for the capacity of the MAC address table to 20000. device# configure terminal device(config)# system-max mac 20000 Release Command History 08.0.40 The command is not valid as you cannot change the number in ICX 7750, ICX 7450, and ICX 7250 devices.

16 128 128 ICX 7750 16 128 128 ICX 8200 4 16 16 The no form of the command resets the VRF instance to the default value. The following example configures the maximum number of VRF instance as 20. device(config)# system-max ip-vrf 20 device(config)# write memory device(config)# end

interface. device(config)# clear dot1x statistics ethernet 1/1/1 Release version Command history 08.0.20 The all option was removed from the command for ICX 6430, ICX 6450, ICX 6610, and FCX devices. 08.0.40 The all option was removed from the command for ICX 7450, ICX 7750, and ICX 7250 devices. The all option was removed from the command for ICX 7450 and ICX 7250 devices. 08.0.70 The stack-unit option was added.