Search Results: "icx 7150"

and IPv6 addresses are removed. The tunnel loopback configuration is removed. ICX 7150 devices do not support tunnels. This task is not supported for ICX 7150 devices. To assign the VRF named VRF1 to tunnel 1, enter the following commands. device(config)# interface tunnel 1 device(config-tnif-l)# vrf forwarding VRF1

and IPv6 addresses are removed. The tunnel loopback configuration is removed. ICX 7150 devices do not support tunnels. This task is not supported for ICX 7150 devices. To assign the VRF named VRF1 to tunnel 1, enter the following commands. device(config)# interface tunnel 1 device(config-tnif-l)# vrf forwarding VRF1

IEEE Compliance IEEE Compliance IEEE Compliance The following table lists the IEEE standards that are supported on the RUCKUS ICX platforms. Footnotes indicate exceptions. IEEE Number IEEE Standard Description ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 IEEE 802.1AB Station

ACL applied to the CPU is 15. Standard IPv4 ACLs are not supported. IPv4 extended ACLs or IPv6 ACLs must be used. MAC ACLs are not supported. A DROP action is the only exceed-action allowed in a traffic policy applied to the CPU. ICX 7150 and ICX 7150-ES devices cannot bind an ACL containing a packet

information for all egress buffer profiles configured in the system and a list of all ports attached to any egress buffer profile. Global configuration mode For Ruckus ICX 7150, ICX 7250, ICX 7450, and ICX 7750 devices, this command displays the share queue level of the egress buffer profile. The

in the CLI when deleting a license. Default Package: Pre-installed licenses on the platform. Possible Packages: Possible license packages available for the platform. These license package names are displayed in the show license command output. ICX 7150-ES devices do not require a license and provide

ICX 7450 (front) 4 X 10-Gbps stacking on slot 2 with the icx7400-4x10GF module only ICX 7250 4 X 10-Gbps stacking from dedicated or uplink ports 4 X 10F SFP+ uplink ports: No-PHY 4 X 10F SFP+ stacking ports: With re-timer capability ICX 7150 Standard 2 X 10-Gbps stacking 4 X 10-Gbps stacking from

traffic, use the enable egress-acl-on-cpu-traffic command. CPU traffic on standby and member units in ICX 7150, ICX 7550, and ICX 7850 stacks is, by default, subjected to outbound ACL filtering. In contrast, ICX 7150, ICX 7550, and ICX 7850 standalone devices and stack active-controllers have the same default behavior as other platforms and do not apply outbound ACLs to CPU traffic.

VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 VXLAN support No No 09.0.10a 08.0.95 08.0.95 No No MACsec over VXLAN No No 09.0.10a No 09.0.10a No No VXLAN with Routing in and out

Software Upgrade Software Upgrade Software Upgrade Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 System backup to USB 08.0.70 10.0.10d 08.0.95 No 08.0.90 No 10.0.00 Boot from USB 08.0.70 10.0.10d 08.0.95 08.0.70 08.0.90 No 10.0.00 Software upgrade via CLI 08.0.60