Search Results: "icx 7650"

. Global configuration mode This command is not supported on Ruckus ICX 7150 or ICX 7650 devices. You must configure the priority-flow-control enable command to enable PFC globally before you configure priority-to-PG mapping. Default mapping, mapping priorities, and mapping restrictions changed in

snooping over Multi-Chassis Trunking (MCT) is supported on the following Ruckus ICX devices: ICX 7650 ICX 7850 IGMP snooping is IP-based for all Ruckus ICX devices. Only one mcache will be created for all multicast groups that share same multicast MAC address. The mcache will be created for the group for which the packets first arrive.

disable EEE on a RUCKUS ICX switch by entering the eee or no eee command, respectively. EEE support varies across the RUCKUS ICX switch family: EEE is not supported on any ICX 7650 and 7850 devices; EEE is supported on certain models of ICX 7150. Refer to the release-specific RUCKUS FastIron Monitoring

disable EEE on a RUCKUS ICX switch by entering the eee or no eee command, respectively. EEE support varies across the RUCKUS ICX switch family: EEE is not supported on any ICX 7650 and 7850 devices; EEE is supported on certain models of ICX 7150. Refer to the release-specific RUCKUS FastIron Monitoring

disable EEE on a RUCKUS ICX switch by entering the eee or no eee command, respectively. EEE support varies across the RUCKUS ICX switch family: EEE is not supported on any ICX 7650 and 7850 devices; EEE is supported on certain models of ICX 7150. Refer to the release-specific RUCKUS FastIron Monitoring

resources. Using a low denominator for the sampling rate can cause high CPU utilization. On RUCKUS ICX 7750, ICX 7450, ICX 7250, ICX 7650, ICX 7850, and ICX 7550 the CPU-bound sFlow sample packets are rate-limited to 50 samples per second to avoid high CPU utilization. The sampling rate must be set

certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console as shown in the following example. Command Required to Disable Certificate Check ICX 7150, ICX 7650, and ICX 7850 devices are shipped with embedded certificates that are used for authentication with SmartZone

Switch Port Extender technology, which is based on an ICX 7650, ICX 7750, or ICX 7850 core stack. Refer to the Ruckus FastIron Campus Fabric Configuration Guide for more information.

No Ether type= 0x86dd IPv6 source address. It can use subnet mask or arbitrary bit mask. OXM_OF_IPV6_DST No Yes Yes No Yes Yes Ether type= 0x86dd IPv6 destination address. It can use subnet mask or arbitrary bit mask. OpenFlow match fields for ICX 7650 Match field ICX 7650 Prerequisite Description

that you do not change the denominator to a value lower than the default. Sampling requires CPU resources. Using a low denominator for the sampling rate can cause high CPU utilization. On RUCKUS ICX 7750, ICX 7450, ICX 7250, ICX 7650, ICX 7850, and ICX 7550 the CPU-bound sFlow sample packets are