Search Results: "icx 7150"

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

entries supported is 512 by efault. num Specifies the maximum number of MLD snooping mcache entries supported. For ICX 7650 devices, valid values range from 256 through 8000. For ICX 7150 devices, valid values range from 256 through 1024. Global configuration mode For ICX 8200, ICX 8100, ICX 7850

7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. ICX 7150 devices support up to 3072 IGMP snooping mcache

physical, loopback, or VE interface, through which the other end of the tunnel is reachable. The source interface must have at least one IP address configured on it. ICX 7150 and ICX 8100 devices do not support tunnels. The following example configures the IP address 10.1.2.4 as the source address

show license show license show license Displays information about Self Authenticated Upgrade licenses installed on a device. show license Privileged EXEC mode ICX 7150-ES and ICX 8100 devices do not support license commands. The command can be used on a standalone device or on the active controller

RUCKUS devices: ICX 7150 devices support up to 3072 IGMP snooping mcache entries. The default number of IGMP snooping mcache entries is 512. ICX 7250 devices support 8192 IGMP snooping mcache entries. ICX 7450 devices support 8192 IGMP snooping mcache entries. ICX 7750 switches support 8192 IGMP

7250 devices support 8192 MLD snooping mcache entries. ICX 7450 devices support 8192 MLD snooping mcache entries. ICX 7150 devices support up to 3072 MLD snooping mcache entries. The default number of MLD snooping mcache entries is 512. ICX 7750 switches support up to 8192 MLD snooping mcache entries

Configuration changes in PE mode before joining the CB Configuration changes in PE mode before joining the CB Configuration changes in PE mode before joining the CB When the system reboots after you save and reload a Provisional-PE configuration on an ICX 7150, ICX 7250, or ICX 7450 unit, the unit

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7750 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

latency and protocol flaps. force Specifies that UPnP packets are not forwarded. Global configuration mode This command is just supported for ICX 7150 devices. All devices running 8070f and higher support this command. UPnP is a protocol that permits networked device, to discover each others