show hqos interface < port-name >
Displays information about the
Hierarchical Quality of Service (HQoS) interface. The command is used for debug
purposes.
Command Default
No command default.
Modes
Network mode
The show hqos interface
< port-name > commands displays the following
information.
| Output field | Description |
|---|---|
| Thread | Displays information for internal debugging of software threading parameters. It displays the hierarchical levels of the HQoS queuing structure from high to low. However, in this release, only Level 4 is utilized. |
| Level 1: subport | Displays information on subport. |
| Level 2: pipe | Displays information on pipe. |
| Level 3: traffic class (TC) | Displays information on traffic class. |
| Level 4: queue (Q0 to Q7) | Displays queue information for Q0 through Q7. |
Usage Guidelines
This command is supported only on the RUCKUS Edge device.
Examples
Edge# network
Network# show hqos interface port5
Thread:
Input SWQ size = 4096 packets
Enqueue burst size = 256 packets
Dequeue burst size = 220 packets
Packet field 0: slab position = 0, slab bitmask = 0x0000000000000000 (subport)
Packet field 1: slab position = 40, slab bitmask = 0x0000000fff000000 (pipe)
Packet field 2: slab position = 8, slab bitmask = 0x00000000000000fc (tc)
Packet field 2 tc translation table: ([Mapped Value Range]: tc/queue tc/queue ...)
[ 0 .. 15]: 0/0 0/1 0/2 0/3 0/4 0/5 0/6 0/7 1/0 1/1 1/2 1/3 1/4 1/5 1/6 1/7
[16 .. 31]: 0/0 0/1 0/2 0/3 0/4 0/5 0/6 0/7 1/0 1/1 1/2 1/3 1/4 1/5 1/6 1/7
[32 .. 47]: 0/0 0/1 0/2 0/3 0/4 0/5 0/6 0/7 1/0 1/1 1/2 1/3 1/4 1/5 1/6 1/7
[48 .. 63]: 0/0 0/1 0/2 0/3 0/4 0/5 0/6 0/7 1/0 1/1 1/2 1/3 1/4 1/5 1/6 1/7
Port:
Rate = 1250000000 bytes/second
HQOS Rate = 10000000 Kbits/second
Link speed = 10000000 Kbits/second
Port hw if index = 2484575937
Port sw if index = 2510343
MTU = 1514 bytes
Frame overhead = 24 bytes
Number of subports = 1
Number of pipes per subport = 128
Packet queue size: TC0 = 1024, TC1 = 0, TC2 = 0, TC3 = 0 packets
Number of pipe profiles = 3
Subport 0:
Rate = 1250000000 bytes/second
Token bucket size = 1000000 bytes
Traffic class rate: TC0 = 1250000000, TC1 = 1250000000 bytes/second
TC period = 10 milliseconds
Pipe profile 0:
Rate = 1250000000 bytes/second
Token bucket size = 1000000 bytes
Queue Max rate: Q0 = 1250000000, Q1 = 1250000000, Q2 = 1250000000, Q3 = 1250000000 Q4 = 1250000000, Q5 = 1250000000, Q6 = 1250000000, Q7 = 1250000000 bytes/second
TC period = 10 milliseconds
Queue Min rate: Q0 = 0, Q1 = 0, Q2 = 0, Q3 = 0 Q4 = 0, Q5 = 0, Q6 = 0, Q7 = 0 bytes/second
TC0 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 1, Q7 = 1
TC1 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 1, Q7 = 1
Pipe profile 1:
Rate = 1240000000 bytes/second
Token bucket size = 1000000 bytes
Queue Max rate: Q0 = 1240000000, Q1 = 1240000000, Q2 = 1240000000, Q3 = 1240000000 Q4 = 1240000000, Q5 = 1240000000, Q6 = 1240000000, Q7 = 1240000000 bytes/second
TC period = 10 milliseconds
Queue Min rate: Q0 = 12400000, Q1 = 62000000, Q2 = 62000000, Q3 = 62000000 Q4 = 124000000, Q5 = 248000000, Q6 = 310000000, Q7 = 186000000 bytes/second
TC0 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 255, Q7 = 255
TC1 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 1, Q7 = 1
Pipe profile 2:
Rate = 1240000000 bytes/second
Token bucket size = 1000000 bytes
Queue Max rate: Q0 = 1240000000, Q1 = 1240000000, Q2 = 1240000000, Q3 = 1240000000 Q4 = 1240000000, Q5 = 1240000000, Q6 = 620000000, Q7 = 1240000000 bytes/second
TC period = 10 milliseconds
Queue Min rate: Q0 = 12400000, Q1 = 12400000, Q2 = 248000000, Q3 = 248000000 Q4 = 62000000, Q5 = 62000000, Q6 = 248000000, Q7 = 248000000 bytes/second
TC0 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 1, Q7 = 1
TC1 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1, Q4 = 1, Q5 = 1, Q6 = 1, Q7 = 1
History
| Release version | Command history |
|---|---|
| 2.3.0 | This command was introduced. |