show
gpb-decode-all
Displays the decode of all GPB (Google
Protocol Buffers) messages applied during configuration.
Modes
Config Manager mode
Examples
The following example shows sample output for the
show
gpb-decode-all command.
Edge-VM-1-867# cfgmgr
(cfgmgr)# show config-result-history
###### gpb name: EdgeNetworkConfig ######
###### EdgeNetworkConfig_964ACA206E07F411EF84A0000C29 unmarshal data ######
NetworkPorts:
PortType:
LAN_PORT_TYPE
Name:
port1
Enabled:
true
Mac:
00:0c:00:48:85:00
Inet:
ip:"10.10.10.10" subnet:"255.255.255.0"
DhcpClientOptions:
PortType:
LAN_PORT_TYPE
Name:
port2
Enabled:
true
Mac:
00:0c:00:48:48:7c
Inet:
ip:"10.10.10.10" subnet:"255.255.255.0"
DhcpClientOptions:
PortType:
WAN_PORT_TYPE
Name:
port3
Enabled:
true
Mac:
00:0c:00:45:43:85
Inet:
ip:"10.10.10.10" subnet:"255.255.255.128" gateway:"10.176.150.2"
EnableNat:
true
DhcpClientOptions:
opt3_router:true
###### gpb name: EdgeDNS ######
###### EdgeDNS_964ACA206E07F411EF84A0000C2 unmarshal data ######
NameServers:
0.0.0.1
###### gpb name: EdgeClusterConfig ######
###### EdgeClusterConfig_e3b822f1-82e8-4ce3-8a63-6067 unmarshal data ######
ClusterName:
Edge-VM-1
ClusterId:
e3b822f1-82e8-0ee4-8a63-e7b359e5
ClusterMode:
CM_MODE_ACTIVE_BACKUP
History
| Release version | Command history |
|---|---|
| 1.0.0 | This command was introduced. |