show status

Displays the current onboarding status of the RUCKUS Edge device.
Syntax
show status
Command Default

Please provide the command default

Modes

Connect Agent mode

The show status command displays the following information.

Output field Description
Connection agent state Connection agent state.
Status Status:
  • Success
  • The Edge device cannot get controller list. Please check your SmartEdge entry setting. The Edge device gets empty response from VPP status. Please check the network connectivity between controller and device.
  • The Edge device gets cert and key failed. Please check your OTP enroll-device setting.
  • The Edge device cannot reach to controller. Please check the network connectivity between controller and device.
  • The Edge device has been approved
  • The Edge device gets in pending state. Please check controller setting.
  • The Edge device gets in REJECT state from controller. Please check controller setting.
  • The Edge device gets into re-discovery to renew JWT. Current JWT is invalid.
Nats Leaf status Indicates if RUCKUS Edge connects to RUCKUS One as a NATS leaf and is ready to send or receive notification to RUCKUS One.

[ ONLINE | OFFLINE ]

Server List Server List
DRS default URL Server URL for device registration.
Usage Guidelines

The following example shows sample output for the show status command.

Examples
(connect-agent)# show status
----- Ruckus One information -----
Edge is not managed by Ruckus One
Connection agent state:  SETUP
Status:  SmartEdge cannot get controller list.
Please check your SmartEdge entry setting.
Nats Leaf status: OFFLINE
Server List:
DRS default URL:  registrar.ruckuswireless.com
----------------------------------
History
Release version Command history
1.0.0 This command was introduced.