show gpb-decode-all

Displays the decode of all GPB (Google Protocol Buffers) messages applied during configuration.
Syntax
show gpb-decode-all
Modes

Config Manager mode

Examples

The following example shows sample output for the show gpb-decode-all command.

Edge-VM-1-867# cfgmgr
(cfgmgr)# show config-result-history
###### gpb name: EdgeNetworkConfig ######
###### EdgeNetworkConfig_964ACA206E07F411EF84A0000C29 unmarshal data ######
NetworkPorts:
        PortType:
                LAN_PORT_TYPE
        Name:
                port1
        Enabled:
                true
        Mac:
                00:0c:00:48:85:00
        Inet:
                ip:"10.10.10.10" subnet:"255.255.255.0"
        DhcpClientOptions:


        PortType:
                LAN_PORT_TYPE
        Name:
                port2
        Enabled:
                true
        Mac:
                00:0c:00:48:48:7c
        Inet:
                ip:"10.10.10.10" subnet:"255.255.255.0"
        DhcpClientOptions:


        PortType:
                WAN_PORT_TYPE
        Name:
                port3
        Enabled:
                true
        Mac:
                00:0c:00:45:43:85
        Inet:
                ip:"10.10.10.10" subnet:"255.255.255.128" gateway:"10.176.150.2"
        EnableNat:
                true
        DhcpClientOptions:
                opt3_router:true

###### gpb name: EdgeDNS ######
###### EdgeDNS_964ACA206E07F411EF84A0000C2 unmarshal data ######
NameServers:
        0.0.0.1
###### gpb name: EdgeClusterConfig ######
###### EdgeClusterConfig_e3b822f1-82e8-4ce3-8a63-6067 unmarshal data ######
ClusterName:
        Edge-VM-1
ClusterId:
        e3b822f1-82e8-0ee4-8a63-e7b359e5
ClusterMode:
        CM_MODE_ACTIVE_BACKUP
History
Release version Command history
1.0.0 This command was introduced.