Configuring Registration Rules for IP/Subnet-Based AP Assignment
- On the menu, go to
Inventory >
AP Reg. Rules.
The AP Registration Rules window is displayed.
- In the
IP/Subnet tab, click
.
The Add New Registration Rule window is displayed. - Complete the following fields to add registration rule.
- Region: Add a region or select a region from the dropdown list.
- IP Address Type: From the dropdown list, select IPv4 or IPv6.
- IP: Enter the starting IP address.
- Subnet Mask: Enter the subnet mask.
- Cluster: From the dropdown list, select a cluster to which you want to add the AP.
- Zone: From the dropdown list, select an AP zone.
The Domain hierarchy is displayed in the dropdown list. You can select a zone under a specific domain and it helps you to route APs to the right controller and zone within that cluster.- Model:
From the dropdown list, select one or more AP models. By adding the AP
model, the scope of the registration rule is extended to a combination
of IP address range using Subnet and AP models for AP discovery. During
AP discovery, if RUCKUS Network Director finds a match that satisfies both criteria (matching
IP address on subnet and AP model) defined in the registration rule, the
AP will be assigned to the specified SZ cluster and zone.
If the AP matches the AP model but does not match the subnet ID defined in the nested registration rule, the AP will be assigned to the default cluster or staging zone as expected (provided no other registration rules are configured).
If the AP matches only the subnet ID and does not match the AP model defined in the nested registration rule, RND's AP assignment will be based on the following IP/Subnet registration rule configuration scenarios:
- If two IP/subnet registration rules are
configured as shown in the following example, the AP gets
assigned to the specified cluster or zone.
IP/subnet Cluster Zone AP models 172.16.112.100/20 521-SZ 521-zone-1 172.16.112.100/20 521-SZ 521-zone-1 C110,E510,FZM300,FZP300 - If only one IP/subnet registration rule
is configured as shown in the following example, the AP will
be assigned to the default cluster or staging zone.
IP/subnet Cluster Zone AP models 172.16.112.100/20 521-SZ 521-zone-1 C110,E510,FZM300,FZP300
- If two IP/subnet registration rules are
configured as shown in the following example, the AP gets
assigned to the specified cluster or zone.
Note: There can be multiple identical IP/Subnet, but the AP models in the IP/Subnet cannot be the same. - Click
Add to add the registration rule.
An information dialog box is displayed indicating that the registration rule is successfully added.
- Click Ok.