RUCKUS IoT Controller 2.0.0.0 to 1.8.2.0 MR Rollback

Rollback Guidelines

The following guidelines apply to rolling back RUCKUS IoT Controller 2.0.0.0 to 1.8.2.0 MR:

• You cannot use a backup of the RUCKUS IoT Controller 2.0.0.0 database to configure the network of RUCKUS IoT Controller 1.8.2.0 MR.
• Because RUCKUS IoT Controller 1.8.2.0 MR has a number of security issues that have been fixed in RUCKUS IoT Controller 2.0.0.0, RUCKUS highly recommends that you not roll back to RUCKUS IoT Controller 1.8.2.0 MR after a successful migration to RUCKUS IoT Controller 2.0.0.0.

  If you want to roll back from RUCKUS IoT Controller 2.0.0.0 to 1.8.2.0 MR, refer to RUCKUS IoT Controller 2.0.0.0 to 1.8.2.0 MR Gateway Connections for APs in SmartZone 6.1 or 5.2.2.

Reinstalling RUCKUS IoT Controller 1.8.2.0 MR

If you have deleted RUCKUS IoT Controller 1.8.2.0 MR and must reinstall, complete the following steps.

1. Install RUCKUS IoT Controller 1.8.2.0 MR. Refer to the RUCKUS IoT Controller Software Installation Guide, 1.8.2.0 MR and RUCKUS IoT Controller Configuration Guide, 1.8.2.0 MR.
2. Restore the database with the RUCKUS IoT Controller 1.8.2.0 MR backup.
   Note: If the RUCKUS IoT Controller IP address is changed, update the IP address in the APs using Option 43 or the vSZ AP CLI.
   Note: Because the RUCKUS IoT Controller 1.8.2.0 MR license is not part of the database backup, you must contact RUCKUS Support to obtain the license.