Upgrading from a UFI Version to a Later UFI Version

Note: Beginning with FastIron release 10.0.00, manifest file copy is no longer supported for the switch image (Layer 2). The router image (Layer 3) UFI must be used for the manifest file copy process to work correctly.

Upgrading from a UFI version to a later UFI version is a one-step upgrade process.

If you want to upgrade from a UFI version (for example, 08.0.92) to FastIron 09.0.10a or later, download the FastIron 09.0.10a or later UFI and use the boot system flash primary command to reload the device. Copy the FastIron 09.0.10a or later UFI again to the primary and secondary flash partitions to avoid boot image mismatch.

File Transfer Method and Commands Required for Upgrading from a UFI Version

Transfer Method Commands
TFTP 
1a) device# copy tftp flash 10.176.132.11 TNR10010ufi.bin primary
1b) device# copy tftp flash 10.176.132.11 TNR10010ufi.bin secondary
or
2a) device# copy tftp system-manifest 10.176.132.11 FI10010_Manifest.txt primary
2b) device# copy tftp system-manifest 10.176.132.11 FI10010_Manifest.txt secondary
SCP 
device# copy scp flash 10.176.132.11 TNR10010ufi.bin primary
device# copy scp flash 10.176.132.11 TNR10010ufi.bin secondary
HTTPS 
device# copy https flash 10.176.132.132 TNR10010ufi.bin primary
device# copy https flash 10.176.132.132 TNR10010ufi.bin secondary
USB 
device# copy disk0 flash TNR10010ufi.bin primary 
device# copy disk0 flash TNR10010ufi.bin secondary

Parent topic: Upgrade Process