Loading the Golden Image from FastIron Command Line Interface

The Golden image is only supported on ICX 8100 and ICX 8200 devices.

  1. Reset the device to the golden image.
    device# erase system factory-default golden
Setting up the system for Factory Reset from Golden image...
Mounting /golden_image partition...
Successfully mounted /golden_image partition
Found Golden UFI image in /golden_image partition
Golden UFI image (/golden_image/golden_image.ufi) is compatible with the ICX8200-24ZP-POE device
System will go for reload after Factory Reset from Golden image. Please enter 'y' to confirm, 'n' to exit :
(enter 'y' or 'n'): y
  2. Upon confirmation, a detailed warning message is displayed as shown below, prompting you about various files which may be erased during the command execution.
    *************************************************************
*              FACTORY RESET GOLDEN IMAGE ALERT             *
*************************************************************
* Please pay attention to the details listed below          *
* 1. uboot params will be erased, you might want to         *
* backup the uboot params                                   *
* stop at uboot and do 'printenv' to read uboot params      *
* 2. All configuration will be erased, you might want to    *
* backup the config                                         *
* 3. Core Files, Logs will be erased                        *
* 4. All warm memory contents will be erased                *
* 5. SAU license will be restored to original SKU           *
* use show license installed command for more details       *
*************************************************************

*************************************************************
I have read the alert and factory reset can be performed now.
Please enter 'y' to confirm, 'n' to exit :
*************************************************************
(enter 'y' or 'n'):
  3. If your type ‘y’ for both of the displayed warning message(s), then the behavior of the erase system factory-default golden command will be same as erase system factory-default command in terms of the execution workflow with some notable difference(s):
    • It will install the Golden image into both primary and secondary partitions as part of the CLI execution workflow.
    • Once the Golden image is installed into both the primary and secondary partitions, the device will by default boot from the primary partition.
Parent topic: Golden Image