Debug Commands H - P

In this section:

1. debug hw
   Enables the hardware backplane debugging feature in a device.
2. debug igmp-snoop add-del-oif all
   Displays information about the addition or deletion of all outgoing interfaces (OIFs).
3. debug igmp-snoop
   Generates debugging information about IGMP snoop protocol activities.
4. debug igmp-snoop clear
   Clears all the IGMP snooping debug settings.
5. debug igmp-snoop error
   Displays the IGMP snooping multicast error messages.
6. debug igmp-snoop group
   Displays the IGMP snooping multicast group information.
7. debug igmp-snoop level
   Sets the debugging level of IGMP snooping activity.
8. debug igmp-snoop mvr
   Displays the IGMP snooping multicast MVR information.
9. debug igmp-snoop packet
   Displays debugging information related to the IGMP snoop packets.
10. debug igmp-snoop port ethernet
    Displays the IGMP snooping related debug information for the specified Ethernet interface.
11. debug igmp-snoop show
    Displays all the IGMP snooping debug settings.
12. debug igmp-snoop source
    Displays the IGMP snooping related debug information for the specified source address
13. debug igmp-snoop timer
    Displays information about the IGMP snooping related timer events.
14. debug igmp-snoop vlan
    Displays the IGMP snooping related debug information for the specified VLAN ID.
15. debug ikev2
    Enables IKEv2 debugging.
16. debug ip aaa
    Activates the debugging of IP AAA/RADIUS protocol transactions.
17. debug ip arp
    Activates the debugging of ARP packets.
18. debug ip arp inspection
    Enables ARP inspection debugging.
19. debug ip bgp
    Enables BGP debugging information to be displayed.
20. debug ip bgp all-vrfs
    Enables BGP debugging information to be displayed for all virtual routing and forwarding events (VRFs).
21. debug ip bgp dampening
    Displays information about dampening process configurations, route penalties, durations, restraint, and release.
22. debug ip bgp events
    Generates information about BGP events, such as connection attempts and keepalive timer activity.
23. debug ip bgp general
    Enables common BGP debugging information to be displayed.
24. debug ip bgp graceful-restart
    Displays information about BGP graceful restarts. The graceful restart feature minimizes disruptions in forwarding and route flapping when a router restarts.
25. debug ip bgp ip-prefix
    Specifies the IPv4 prefix filter for BGP debugging information for all VRFs or for a specified VRF.
26. debug ip bgp ip-prefix-list
    Specifies the IPv4 prefix filter for BGP debugging information for all VRFs or for a specified VRF.
27. debug ip bgp ipv6-prefix
    Specifies the IPv6 prefix filter for BGP debugging information for all VRFs or for a specified VRF.
28. debug ip bgp ipv6-prefix-list
    Specifies the IPv6 prefix filter for BGP debugging information for all VRFs or for a specified VRF.
29. debug ip bgp keepalives
    Displays information about the status of a resource such as BGP.
30. debug ip bgp route-map
    Associates an existing route map filter with BGP debugging.
31. debug ip bgp route-selection
    Enables BGP debugging information to be displayed for a BGP route selection.
32. debug ip bgp show
    Shows BGP debugging configurations for all VRFs that are currently enabled.
33. debug ip bgp updates
    Displays BGP receive, transmit, or receive and transmit update messages about debug processing.
34. debug ip bgp vrf
    Enables BGP debugging information to be displayed for a non-default virtual routing and forwarding events(VRF) instance.
35. debug ip dhcp-snooping
    Enables debugging of the DHCP snooping activity.
36. debug ip gre
    Please confirm command desciption and let me know if anything needs to be added here

    Activates Generic Routing Encapsulation (GRE) debugging options.
37. debug ip hitless
    Activates the debugging of IPv4 hitless information.
38. debug ip icmp
    Please confirm command desciption and let me know if anything needs to be addedor confirmed here

    Activates ICMP transactions debugging.
39. debug ip igmp add-del-oif
    Displays information about the addition or deletion of the outgoing interfaces (OIFs).
40. debug ip igmp add-del-oif all
    Displays information about the addition or deletion of all the OIFs that are IGMP-enabled.
41. debug ip igmp add-del-oif stack
    Monitors and displays instances of multicast cache activity, such as OIF additions or deletions, and generates a stack trace of the add or delete event.
42. debug ip igmp clear
    Clears all the IGMP debug settings.
43. debug ip igmp down-port
    Monitors the port that is down.
44. debug ip igmp enable
    Enables IGMP debugging.
45. debug ip igmp
    Debugs Internet Group Management Protocol (IGMP) details.
46. debug ip igmp error
    Displays the IGMP multicast error messages.
47. debug ip igmp group
    Matches the IGMP-enabled group based on the IP address.
48. debug ip igmp level
    Sets the debug level of the IGMP.
49. debug ip igmp packet
    Traces the IGMP packets.
50. debug ip igmp physical-port
    Matches the physical port that is connected.
51. debug ip igmp prime-port ethernet
    Monitors the activity of the physical port if the trunking is carried out on the primary port.
52. debug ip igmp protocol
    Displays debugging information about the IGMP queries and reports transmitted and received.
53. debug ip igmp proxy clear
    Clears all the IGMP proxy debug settings.
54. debug ip igmp proxy error
    Displays the IGMP proxy error messages.
55. debug ip igmp proxy event
    Enables debugging of IGMP proxy events.
56. debug ip igmp proxy packet
    Displays debugging information related to the IGMP proxy packets.
57. debug ip igmp proxy rx
    Displays the IGMP proxy packets received.
58. debug ip igmp proxy show
    Displays the IGMP proxy debug settings.
59. debug ip igmp proxy tx
    Displays the IGMP proxy packets transmitted.
60. debug ip igmp proxy vrf
    Displays IGMP proxy related debug information for the specified VRF.
61. debug ip igmp rx
    Displays the IGMP packets received.
62. debug ip igmp show
    Displays the IGMP debug settings.
63. debug ip igmp source
    Matches the source of the control packet or IGMP V3 source packets.
64. debug ip igmp timer
    Monitors the IGMP timer activity.
65. debug ip igmp tx
    Displays the IGMP packets transmitted.
66. debug ip igmp vrf
    Displays IGMP-related debug information for the specified VRF.
67. debug ip msdp
    Generates information about Multicast Source Discovery Protocol (MSDP) activities.
68. debug ip ntp
    Displays NTP system information.
69. debug ip ospf
    Enables OSPF debugging information to be displayed.
70. debug ip ospf spf
    Generates information about Open Shortest Path First (OSPF) activity including SPF runs and calculations.
71. debug ip ospf vrf
    Generates debugging information about the Open Shortest Path First (OSPF) Virtual Routing and Forwarding (VRF) instance.
72. debug ip pim
    Enables the Protocol Independent Multicast (PIM) debugging.
73. debug ip pim add-del-oif
    Displays information about the mcache activity.
74. debug ip pim bootstrap
    Enables bootstrap debugging.
75. debug ip pim clear
    Clears all the Protocol Independent Multicast (PIM) debug settings.
76. debug ip pim control-source
    Monitors the control packet sent by the given router and displays debugging information.
77. debug ip pim event
    Enables debugging of Protocol Independent Multicast (PIM) events.
78. debug ip pim group
    Displays the Protocol Independent Multicast (PIM) related activities for the specified IP address of the PIM group.
79. debug ip pim join-prune
    Controls join prune processing and displays debugging information related to the join prune messages.
80. debug ip pim level
    Sets the Protocol Independent Multicast (PIM) level.
81. debug ip pim nbr
    Controls the Protocol Independent Multicast (PIM) IPv4 neighbor changes.
82. debug ip pim packet
    Displays debugging information about the Protocol Independent Multicast (PIM) packets.
83. debug ip pim physical-port ethernet
    Displays information of the PIM physical ports that are connected.
84. debug ip pim regproc
    Controls register processing.
85. debug ip pim rp
    Controls the Rendezvous Point (RP) processing.
86. debug ip pim show
    Displays the PIM debug settings. Do not use the show debug command for this purpose. The show debug command displays general debug information.
87. debug ip pim source
    Monitors the content related to a specific PIM server. The ipaddr variable refers to the IP address of the PIM server source.
88. debug ip pim vrf
    Displays the PIM related debugging information for the specified VRF.
89. debug ip rip vrf
    Enables RIP debugging information to be displayed for a nondefault VRF instance.
90. debug ip pimsm-snoop
    Describes the debug commands used for troubleshooting issues related to the IPv4 Protocol Independent Multicast Sparse mode (PIM-SM) snoop configurations.
91. debug ip rip
    Enables RIP debugging information to be displayed.
92. debug ip routing
    Displays information about IP routing table events.
93. debug ip rtm
    Displays information about the routing table manager (RTM), including changes in the routing table.
94. debug ip ssh
    Activates the SSH debugging.
95. debug ip sync
    Displays debugging information about IP synchronization and faults in synchronization.
96. debug ip source guard
    Activates the IP source guard debugging.
97. debug ip tcp
    Displays debugging information about Transmission Control Protocol (TCP) transactions.
98. debug ip udp
    Any further infomration to add to this command?

    Activates the UDP debugging.
99. debug ip vrrp packet
    Displays debugging information of any VRRP or VRRP-E packets within the device.
100. debug ip vrf
     Activates IP VRF debugging.
101. debug ip vrrp
     Displays debugging information for VRRP.
102. debug ip web
     Activates the web debugging.
103. debug ip web-ssl
     Activates web Secured Socket Layer (SSL) debugging.
104. debug ipsec all
     Displays all debugging information related to IPsec operation.
105. debug ipsec esp
     Enables debugging of Encapsulating Security Payload (ESP)
106. debug ipsec in
     Enables the display of debugging information related to inbound OSPFv3 packets with IPsec.
107. debug ipsec out
     Enables the display of debugging information related to outbound OSPFv3 packets with IPsec.
108. debug ipsec policy
     Enables the display of debugging information for IPsec policy.
109. debug ipv6 address
     Enables the collection of information about configured IPv6 address packets.
110. debug ipv6 cache
     Enables the collection of information about configured IPv6 cahce entries.
111. debug ipv6 dhcp relay
     Displays debug information related to Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay agent.
112. debug ipv6 dhcp snooping
     Enables debugging of the DHCPv6 snooping activity.
113. debug ipv6 hitless
     Enables the collection of hitless information.
114. debug ipv6 icmp
     Enables the collection of ICMPv6 information.
115. debug ipv6 mld
     Displays the debugging information about the received and sent packets of the Multicast Listening Discovery (MLD).
116. debug ipv6 mld add-del-oif
     Enabled with the MLD debug ipv6 mcache-source or debug ipv6 mcache-group commands at the same time.
117. debug ipv6 mld add-del-oif all
     Monitors outgoing interfaces (OIFs) that are added or deleted for all the MLD groups.
118. debug ipv6 mld add-del-oif stack
     Displays the MLD stack trace.
119. debug ipv6 mld clear
     Clears all the MLD debug settings..
120. debug ipv6 mld detail
     Displays the details of the MLD messages.
121. debug ipv6 mld enable
     Enables debugging of MLD configurations.
122. debug ipv6 mld error
     Displays error information related to MLD.
123. debug ipv6 mld group
     Debugs the MLD group matching.
124. debug ipv6 mld level
     Displays the different levels of debugging output.
125. debug ipv6 mld mcache-group
     Displays a filter of only desired mcache group debugging output.
126. debug ipv6 mld phy-port ethernet
     Matches the input of the physical port.
127. debug ipv6 mld prime-port ethernet
     Enables the activity of the physical port and primary port if trunking happened.
128. debug ipv6 mld protocol
     Displays debugging information about the IPv6 MLD queries and reports transmitted and received.
129. debug ipv6 mld rx
     Displays the IPv6 MLD packets received.
130. debug ipv6 mld show
     Displays the IPv6 MLD debug settings.
131. debug ipv6 mld source
     Displays the MLD related debug information for the specified source address.
132. debug ipv6 mld timer
     Monitors the MLD timer activity.
133. debug ipv6 mld tx
     Displays the IPv6 MLD packets transmitted..
134. debug ipv6 mld vlan
     Monitors the MLD VLAN activity.
135. debug ipv6 mld vrf
     Displays MLD related debug information for the specified VRF.
136. debug ipv6 nd
     Enables Neighbor Discovery (ND) debug logs and displays the debugging information about dropped Neighbor Solicitation (NS) and Neighbor Advertisement (NA) packets.
137. debug ipv6 ospf
     Displays debugging information for OSPFv3.
138. debug ipv6 ospf vrf
     Displays debugging information for OSPFv3 for a non-default VRF instance.
139. debug ipv6 ospf packet-lsa-ack
     Displays all OSPFv3 LSA acknowledgment packets in rx or tx mode.
140. debug ipv6 ospf route
     Displays all OSPFv3 routes.
141. debug ipv6 pim
     Enables theIPv6 Protocol Independent Multicast (PIM) debugging.
142. debug ipv6 pim add-del-oif
     Displays information about the mcache activity.
143. debug ipv6 pim bootstrap
     Enables IPv6 Protocol Independent Multicast (PIM) bootstrap debugging.
144. debug ipv6 pim clear
     Clears all the IPv6 PIM debug settings.
145. debug ipv6 pim event
     Enables debugging of IPv6 PIM events.
146. debug ipv6 pim group
     Displays the IPv6 PIM related debugging information for the specified PIM group.
147. debug ipv6 pim join-prune
     Controls join prune processing and displays debugging information related to the IPv6 join prune messages.
148. debug ipv6 pim level
     Sets the IPv6 Protocol Independent Multicast (PIM) level.
149. debug ipv6 pim nbr
     Controls the IPv6 PIM neighbor changes.
150. debug ipv6 pim packet
     Displays debugging information about the IPv6 PIM packets.
151. debug ipv6 pim regproc
     Controls IPv6 PIM register processing.
152. debug ipv6 pim rp
     Controls the Rendezvous Point (RP) processing for IPv6 PIM events.
153. debug ipv6 pim show
     Displays the IPv6 PIM debug settings.
154. debug ipv6 pim source
     Displays the IPv6 PIM related debugging information for the specified source address.
155. debug ipv6 pim vrf
     Displays the IPv6 PIM related debugging information for the specified VRF.
156. debug ipv6 pimsm-snoop
     Troubleshoots issues related to IPv6 PIM-SM snoop configurations.
157. debug ipv6 ra
     Enables router advertisement (RA) message debug logs and displays the debugging information about ingoing and outgoing RA messages.
158. debug ipv6 raguard
     Enables RA guard debug messages.
159. debug ipv6 rip
     Displays debugging information about the IPv6 Routing Information Protocol (RIP) events.
160. debug ipv6 rtm
     Enables route table manager (RTM) debugging information to be displayed.
161. debug ipv6 sync
     Displays debugging information about IP synchronization and faults in synchronization.
162. debug ipv6 tcp
     Please confirm command desciption and let me know if anything needs to be added here

     Displays debugging information about IPv6 Transmission Control Protocol (TCP) transactions.
163. debug keychain
     Enables keychain debugging.
164. debug lacp messages
     Enables Link Aggregation Control Protocol (LACP) PDU debugging.
165. debug loop-detect
     Allows the RUCKUS devices to detect loops using the RUCKUS Port Loop Detection (PLD) protocol and disable a port that is on the receiving end of a loop. The loop is detected by sending Bridge Packet Data Unit (BPDU) test packets.
166. debug loop-detect level
     Debugs loop detection in a particular level.
167. debug loop-detect port
     Debugs loop detection on a physical port or VLAN.
168. debug mac
     Enables the Media Access Control (MAC) address debugging action.
169. debug mac-authentication
     Enables the MAC authentication debugging for a single port.
170. debug mecid
     Displays debugging information for ME-CID Manager.
171. debug mem-leak
     Enables or disables memory leak detection.
172. debug metro-ring bpdu
     Monitors metro ring protocol (MRP) Bridge Packet Data Unit (BPDU) packets.
173. debug metro-ring diags
     Enables metro ring protocol (MRP) diagnostics.
174. debug metro-ring event
     Displays debugging information about metro ring protocol (MRP) events.
175. debug metro-ring ring-id
     Sets the ring ID for metro ring protocol (MRP) events.
176. debug metro-ring trace-l2
     Enables metro ring protocol (MRP) Layer 2 trace debugging.
177. debug metro-ring tx_bpdu
     Debugs metro ring protocol (MRP) transmit BPDU packets.
178. debug mld-snoop
     Displays Multicast Listener Discovery (MLD) snooping debugging information.
179. debug mld-snoop add-del-oif all
     Displays information about the addition or deletion of all the OIFs that are Multicast Listener Discovery (MLD) snooping-enabled.
180. debug mld-snoop clear
     Clears all the MLD snooping debug settings.
181. debug mld-snoop error
     Displays the MLD snooping multicast error messages.
182. debug mld-snoop group
     Displays the MLD snooping multicast group information.
183. debug mld-snoop mcache-group
     Displays MLD snoop debugging information related to mcache activity for the specified group address.
184. debug mld-snoop packet
     Displays debugging information related to the MLD snoop packets.
185. debug mld-snoop show
     Displays all the MLD snooping debug settings.
186. debug mld-snoop timer
     Displays the MLD snooping related timer events.
187. debug mstp bpdu
     Monitors Multiple Spanning Tree Protocol (MSTP) Bridge Packet Data Units (BPDUs).
188. debug mstp enable
     Enables Multiple Spanning Tree Protocol (MSTP) debugging.
189. debug mstp events
     Displays Multiple Spanning Tree Protocol (MSTP) state machine events.
190. debug mstp level
     Monitors MSTP level.
191. debug mstp msti
     Displays information for a specific Multiple Spanning Tree Protocol (MSTP) instance (MSTI).
192. debug mstp ports
     Debugs specific Multiple Spanning Tree Protocol (MSTP) ports.
193. debug mstp port-level
     Displays the hardware level of the port on which the Multiple Spanning Tree Protocol (MSTP) is running.
194. debug mstp show
     Displays the currently enabled Multiple Spanning Tree Protocol (MSTP) debug parameters.
195. debug mstp state
     Displays information about the Multiple Spanning Tree Protocol (MSTP) port state events.
196. debug mstp verbose
     Displays the Multiple Spanning Tree Protocol (MSTP) debug information in the verbose mode.
197. debug mvrp
     Enables Multiple VLAN Registration Protocol (MVRP) debugging.
198. debug packet-capture
     Displays information about packet-capture activity.
199. debug packet-capture filter
     Enables the filter option for the raw packets.
200. debug packet-capture filter match
     Toggles to display all matched packets.
201. debug packet-capture filter none
     Removes all the filters that are configured.
202. debug packet-capture filter show
     Displays the filter information for the particular filter index..
203. debug packet-capture mode
     Displays the format of the packets to be captured for debugging information.
204. debug pki
     Enables Public Key Infrastructure (PKI) debugging.
205. debug port hw-state
     Monitors the hardware status of a port.
206. debug port port
     Monitors a specific physical port.
207. debug port ten-gig
     Monitors all 10-Gigabit ports in the RUCKUS devices.
208. debug port up-down
     Monitors the status of the ports.
209. debug port vlan
     Monitors a specific VLAN.
210. debug pp-bum-trunk-hash
     Traces and displays the output port through which a given packet can be sent out in a trunk for a broadcast, unknown-unicast, and multicast (BUM) flow.
211. debug pp-trunk-hash
     Traces and displays the output port through which a given packet can be sent out in a LAG.
212. debug pppoe intermediate-agent
     Activates Point-to-Point Protocol over Ethernet Interface Agent (PPPoE IA) debugging.
213. debug pvlan cli
     Debugs private VLAN (PVLAN) CLI.
214. debug pvlan egr-trans
     Debugs egress translation on secondary VLAN ports.
215. debug pvlan event
     Monitors private VLAN (PVLAN) event.
216. debug pvlan vlan
     Debugs specific private VLAN (PVLAN).