Configuring IPv4 PIM Join and Prune Policy

IPv4 PIM Join and Prune policies can be configured.
The following task configures the PIM (RP, G) jp-policy.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Enable PIM globally. 
    device(config)# router pim
  3. Configure the IPv4 PIM Join and Prune policy, specifying an RP address and an ACL list. 
    device(config-router-pim)# jp-policy 10.9.9.9 1
  4. Configure the IPv4 PIM Join and Prune policy, specifying another RP address and an ACL list. 
    device(config-router-pim)#  jp-policy 22.9.9.9 22
  5. Configure the IPv4 PIM Join and Prune policy, specifying another RP address and an ACL list. 
    device(config-router-pim)# jp-policy 100.9.9.9 1

The following example configures the PIM (RP, G) Join and Prune policy. An ACL number is specified. 

device# configure terminal
device(config)# router pim
device(config-router-pim)# jp-policy 10.9.9.9 1
device(config-router-pim)# jp-policy 22.9.9.9 22
device(config-router-pim)# jp-policy 100.9.9.9 1

The following example configures the PIM (RP, G) Join and Prune policy for a non-default VRF instance. An ACL number is specified.

device# configure terminal
device# router pim vrf blue
device# (config-pim-router-vrf-blue)# jp-policy 10.9.9.9 1
device(config-pim-router-vrf-blue)# jp-policy 22.9.9.9 22 
device(config-pim-router-vrf-blue)# jp-policy 100.9.9.9 1

The following example configures the PIM (*, G) and (S, G) Join and Prune policy for the default VRF. An ACL name is specified.

device# configure terminal
device(config)# router pim
device(config-pim-router)# jp-policy wg-sg-acl

The following example unconfigures a previously configured PIM (RP, G) Join and Prune policy for a non-default VRF instance. 

device(config)# router pim vrf blue
device(config-pim-router-vrf-blue)# no jp-policy 10.9.9.9    1
device(config-pim-router-vrf-blue)# no jp-policy 22.9.9.9    22 
device(config-pim-router-vrf-blue)# no jp-policy 100.9.9.9   1

The following example unconfigures a previously configured PIM (*, G) and (S, G) Join and Prune policy.

device# configure terminal
device(config)# router pim
device(config-pim-router)# no jp-policy wg-sg-acl
Parent topic: IPv4 PIM Join and Prune Policy