`debug ip msdp`

Generates information about Multicast Source Discovery Protocol (MSDP) activities.

Syntax

Parameters

alarms: Displays TCP packet related errors such as header length error, content error, and so on.
clear: Removes the debug commands enabled in MSDP.
enable: Enables all MSDP related debugs. This command needs to be clubbed with other debug commands.
events: Displays information about the MSDP events.
group group-address: Displays MSDP debugs limited to a group.
message: Displays information about the MSDP messages.
peer peer-address: Displays MSDP debugs limited to a peer.
rpf-peer: Displays debug message whenever MSDP SA message IP address fails RPF - PEER check.
show: Displays all the MSDP commands enabled in the system.
source source-address: Displays MSDP debugs limited to a source address.
vrf vrf-name: Displays MSDP debugs limited to a specific VRF.

Modes

Privileged EXEC mode

Examples

The following example displays information about the MSDP processing alarms.

device# debug ip msdp alarms
:MSDP[default-vrf]: Bad Header Read - Close connection to peer 8.1.1.1

The following example displays information about the MSDP events.

device# debug ip msdp events                                                                                                May 18 03:28:52:625984:info:fi_debug:debug_logs:1:84083343552938752: : MSDP[vrf1]: Originating SA message ...
May 18 03:28:52:625898:info:fi_debug:debug_logs:1:84083343552938752: : MSDP[default-vrf]: Originating SA message ...
May 18 03:28:40:576341:info:fi_debug:debug_logs:1:84072391386333952: : MSDP[vrf1]: Initiate Transport Connection to MSDP peer 40.89.0.2 (Peer num=3):
May 18 03:28:40:576271:info:fi_debug:debug_logs:1:84072391386333952: : MSDP[vrf1]: Process START event for peer 40.89.0.2, local = 40.89.0.1
May 18 03:28:36:550897:info:fi_debug:debug_logs:1:84068723484263168: : MSDP[default-vrf]: Keep Alive timer expired: send keep alive to peer 40.70.0.1
May 18 03:28:30:000181:info:fi_debug:debug_logs:1:84062749184754432: : MSDP[vrf1]: Peer 40.89.0.2 back to IDLE state
May 18 03:28:30:000102:info:fi_debug:debug_logs:1:84062749184754432: : MSDP[vrf1]: Closing TCP connection to peer 40.89.0.2

The following example displays information about MSDP debugs limited to a group.

device# debug ip msdp message
device# debug ip msdp group 236.1.1.1                                                                                      May 18 03:31:39:226887:info:fi_debug:debug_logs:1:84235278021034752: : MSDP[default-vrf]: 40.70.0.1: State=4, Rcv KA
May 18 03:31:37:241508:info:fi_debug:debug_logs:1:84233456954901248: : MSDP[default-vrf]: Peer 40.70.0.1: Xmt KA
May 18 03:31:22:178854:info:fi_debug:debug_logs:1:84219798958899968: : MSDP[vrf1]: 8.1.1.1: State=4, Rcv KA
May 18 03:31:07:117002:info:fi_debug:debug_logs:1:84206037883683584:       (40.71.0.2,236.1.1.1) (40.84.0.2,236.1.1.1)
May 18 03:31:07:116958:info:fi_debug:debug_logs:1:84206037883683584:   RP 40.70.0.1, SA count 4
May 18 03:31:07:116896:info:fi_debug:debug_logs:1:84206037883683584: : MSDP[default-vrf]: 40.70.0.1: State=4, Rcv SA
May 18 03:31:05:110713:info:fi_debug:debug_logs:1:84204216817550080: : MSDP[vrf1]: Peer 8.1.1.1: Xmt KA
May 18 03:30:53:064816:info:fi_debug:debug_logs:1:84193251766043392: : MSDP[vrf1]: Originating SA message ...
May 18 03:30:53:064726:info:fi_debug:debug_logs:1:84193251766043392: : MSDP[default-vrf]: Originating SA message ...
May 18 03:30:39:023490:info:fi_debug:debug_logs:1:84180448468534016: : MSDP[default-vrf]: 40.70.0.1: State=4, Rcv KA
May 18 03:30:37:010585:info:fi_debug:debug_logs:1:84178635992335104: : MSDP[default-vrf]: Peer 40.70.0.1: Xmt KA
May 18 03:30:21:945124:info:fi_debug:debug_logs:1:84164857737249536: : MSDP[vrf1]: 8.1.1.1: State=4, Rcv KA

RUCKUS FastIron Debug Command Reference, 10.0.10 53-1005773-05

debug ip msdp

`debug ip msdp`