Debug Commands A - G

In this section:

  1. debug 802.1w all_802_1w_events
    Debugs all the RSTP transactions, timers, and packets on a specific VLAN.
  2. debug 802.1w messages
    Displays BPDU information on a VLAN.
  3. debug 802.1w timer
    Debugs the RSTP (IEEE 802.1w) timer expiration.
  4. debug 802.1w transitions
    Debugs the RSTP state machine transitions.
  5. debug acl log
    Sends the ACL log to the CPU for all the packets.
  6. debug all
    Enables all the debug functions and should be used only during a troubleshooting session with a RUCKUS technician.
  7. debug bfd
    Displays debugging information about Bidirectional Forwarding Detection (BFD).
  8. debug bum-statistics
    Enables BUM rate limit statistics debugging.
  9. debug cluster all
    Enables the Multi-Chassis Trunking (MCT) debugging information log.
  10. debug cluster ccp
    Enables debugging of all CCP FSM messages, CCP client registrations, CCP packet exchanges from clients, keepalive messages and notifications, data buffer usage, and specific peer-related message exchanges.
  11. debug cluster client-auto-detect
    Displays debugging information related to cluster client auto-detect functionality.
  12. debug cluster config
    Enables debugging for any addition or deletion of the clusters, addition or deletion of the clients, or exchange of cluster finite state machine (FSM) messages between the peer and the client isolation mode.
  13. debug cluster fsm
    Enables debugging of the MCT cluster FSM for a particular client.
  14. debug cluster intf-mac
    Displays interface MAC debug information for the cluster.
  15. debug cluster mdup
    Displays MDUP debug information for the cluster.
  16. debug cluster show
    Displays debug flags for the cluster.
  17. debug cluster stp
    Enables debugging of STP and RSTP modules.
  18. debug coa
    Enables debugging of Change of Authorization (COA) messages.
  19. debug destination
    Specifies a destination for debugging output. The default destination is the system console, but you can redirect output to a syslog buffer, Telnet session, or SSH session.
  20. debug dhcp-client alarms
    Displays the debugging information of the Dynamic Host Configuration Protocol (DHCP) client on a particular port ID.
  21. debug dhcp-client events
    Displays debugging information about Dynamic Host Configuration Protocol (DHCP) client events related to configuration.
  22. debug dhcp-client warnings
    Displays debugging information about the Dynamic Host Configuration Protocol (DHCP) client.
  23. debug dot1x hitless
    Enables the 802.1x hitless debugging.
  24. debug dot1x-events
    Displays the authentications failed or succeeded and the application of VLANs or ACLs requested by the Remote Authentication Dial In User Service (RADIUS) server.
  25. debug dot1x-filter
    Enables the 802.1x filter debugging.
  26. debug dot1x-misc
    Enables the 802.1x miscellaneous debugging.
  27. debug dot1x-mka
    Enables debugging for the MACsec Key Agreement (MKA) protocol.
  28. debug dot1x-packets
    Displays information about 802.1x packets.
  29. debug dot1x-timers
    Displays information about 802.1x timers.
  30. debug forwarding hw-clear
    Debugs the events which trigger MAC clear in hardware.