Displaying IPv4 PBR Information

Use the show policy-routing ipv4 command with available parameters to display information about policy-based routing applied to IPv4 interfaces.

The following examples show the IPv4 policy-based routing applied on device interfaces.

device(config)# show policy-routing ipv4 global 
        Configured, pbrmap, Active
        Active Port List: 
        ethernet 
                1/1/2, 1/1/3, 1/1/4, 1/1/5, 1/1/6, 1/1/7, 1/1/8, 1/1/9
        ve 
                Ve 131, Ve 132

device# show policy-routing ipv4 interface all
ve 11 :
        Configured, pbrmap, Active

device# show policy-routing ipv4 interface ethernet
ethernet 1/1/1: 
        Configured, pbrmap, Active

device# show policy-routing ipv4 interface ethernet 2/2/1
ethernet 2/2/1: 
        Configured, pbrmap, Active

For more information on the show policy-routing command, refer to the RUCKUS FastIron Command Reference.