Configuring a Secure SSID for Hotspot 2.0 R1

A secure SSID is required for Hotspot 2.0 Release 1.
  1. In the Controller UI, go to Wireless LANs.
  2. Be sure to highlight the Zone in which you want to the Secure SSID to reside. This example uses the Default zone.

    Highlighting the Zone in Which to Create the Secure SSID

  3. Click Create.
    The Create WLAN Configuration screen appears. An example of how you configure this screen follows:

    Creating a Hotspot 2.0 Secure SSID

  4. In the Name field, enter a descriptive name for the secure SSID.
  5. From the Zone drop-down list, be sure that the zone where the Secure SSID resides is selected.
  6. From the WLAN Group drop-down list, select the WLAN group where the Secure SSID resides.
  7. For Authentication Type, select Hotspot 2.0 Access.
  8. For Authentication Method, select 802.1x EAP.
  9. For Encryption Method, select WPA2.
  10. For Encryption Algorithm, select AES.
  11. For the Hotspot 2.0 profile, use the drop-down list to select the previously configured Hotspot 2.0 profile.
  12. Use the default values for the remaining fields, and click OK.
    The secure SSID should now appear in the list of configured wireless LANs.