Configuring the Controller
Create an external DPSK WLAN on one of the supported RUCKUS controllers.
SmartZone 5.1 or Later or Virtual SmartZone 3.60 or Later
Refer to the following table for the settings you need to create the eDPSK WLAN on a SmartZone controller.
Note: You can refer also to:
- Configuring an External DPSK WLAN on a Ruckus SmartZone Controller
- Your SmartZone controller documentation about how to create a DPSK WLAN.
Fields/Values to Use for SmartZone eDPSK WLAN
| WLAN Configuration Section | Configuration Field and Corresponding Value |
|---|---|
| General Options | Name: Descriptive name for the eDPSK WLAN you are creating |
| SSID: Name of the WLAN you just created | |
| Zone: Zone in which the eDPSK WLAN will reside | |
| Authentication Options | Authentication Type: Standard Usage |
| Method: Open | |
| Encryption options | Method: WPA2 |
| Algorithm: AES | |
| 802.11w MFP: Disabled | |
| Dynamic PSK: External | |
| Authentication and Accounting Services | Use controller as proxy: Enable |
| Authentication Service | Name: Any descriptive name |
| Service Protocol: RADIUS | |
| IP address: IP address of your external RADIUS server. (This is the IP address of your Cloudpath system.) | |
| Port: 1812 is typically used and is the default. | |
| Shared Secret: The shared secret of your external RADIUS server | |
| Confirm Secret: Must again enter the shared secret of your external RADIUS server. | |
| Advanced | Enable Dynamic VLAN (AAA Override) box: Box should be checked. |
ZoneDirector 10.4 or Later
Refer to the following table for the settings you need to create the eDPSK WLAN on a ZoneDirector controller.
Note: For detailed instructions, refer to your
ZoneDirector User Guide, "Enabling Dynamic Pre-Shared Keys on a WLAN" section, about how to create a DPSK
WLAN.
Fields/Values to Use for ZoneDirector eDPSK WLAN
| WLAN Configuration Section | Configuration Field and Corresponding Value |
|---|---|
| General Options | Name: Descriptive name for the eDPSK WLAN you are creating |
| eSSID: Name of the WLAN you just created | |
| WLAN Usages | Type: Standard Usage |
| Authentication Options | Method: Open |
| Dynamic-PSK: External: Use an external AAA (RADIUS) server for client authentication | |
| DPSK Authentication Server: Drop-down selection for RADIUS server | |
| Encryption Options | Method: WPA2 |
| Algorithm: AES | |
| 802.11w MFP: Disabled |
Unleashed 200.8 or Later
Refer to the following table for the settings you need to create the eDPSK WLAN on an Unleashed controller.
Note: For detailed instructions, refer to your Unleashed controller documentation about
how to create a DPSK WLAN.