Conifguring a DPSK WLAN on a Ruckus SmartZone Controller

You can configure a DPSK WLAN on a Ruckus Wireless SmartZone controller so that you can then use DPSK as one method of onboarding users to Cloudpath.
Follow these steps to configure a DPSK WLAN on a Ruckus SmartZone controller.
Note: The procedure shown in this section is based on the user interface of a SmartZone controller version 3.5.1. Different versions of SmartZone may have minor differences in terms of which configuration options appear in what sections of a screen.
  1. Log in to your Ruckus SmartZone controller.
  2. Click the Wireless LANS tab.
    The following screen appears:

    Wireless LANs Screen

  3. On the Wireless LANs screen, click the + Create button.
    The Create WLAN Configuration appears. This screen is shown below (with each area of the screen in a collapsed view):

    Create WLAN Configuration Screen on SmartZone

    Note: Unless otherwise specified in the remaining steps, you do not have to change default values. The procedure described here is specific to Cloudpath; for information about any fields that are not described here, refer to your controller documentation.
  4. Complete the General Options section of the screen:

    General Options Section of the Create WLAN Configuration Screen

    • Name: Enter a meaningful name for the DPSK WLAN you are creating.
    • SSID: When you click in this field, the name you entered above also appears in this field.
    • Zone: From the drop-down list, select the zone in which the DPSK WLAN will reside. This can be the default zone.
  5. In the WLAN Usage section of the screen, use the default selection of Standard usage.

    WLAN Usage section of the Create WLAN Configuration Screen

  6. In the Authentication Options section of the screen, be sure that the default selection of Open is selected.

    Authentication Options section of the Create WLAN Configuration Screen

  7. In the Encryptions Options section of the screen, you must select "WPA2," which expands the section as follows:

    Encryption Options Section After Selecting WPA2 Method

    Note: The Dynamic PSK field may appear in a different section of the screen on other versions of SmartZone.
    1. The Algorithm field must be AES, which is the default.
    2. In the Passphrase field, enter a passphrase for the DPSK WLAN that you are creating, and make note of this passphrase. The minimum length is eight characters.
    3. In the Dynamic PSK field, select Internal. Once you make this selection, DPSK is enabled, and the screen expands again, allowing you to complete the configuration of this section of the screen:

      Encryptions Options Expanded After Enabling DPSK

      • In the DPSK Length field, enter a value that complies with the security policy of your company. The default is 62.
      • For DPSK Type, choose the option that complies with the security policy of your company. The default is Secure DPSK.
      • For DPSK Expiration, use the drop-down menu to select a value that complies with the security policy of your company. The default value is Unlimited.
  8. In the Accounting Server section, you can use the drop-down list to select an already-configured AAA accounting server, or you can use the + Create button to create one.

    Accounting Server Section of the Create WLAN Configuration Screen

  9. In the Options section, you can use the default values, shown below:

    Options Section of the Create WLAN Configuration Screen

  10. In the RADIUS Options section, you can use the default values, shown below:

    RADIUS Options section

  11. In the Advanced Options section, there are many fields (not shown here), but you can also use all the default values.
  12. Click OK to create the Wireless LAN with DPSK enabled.
    Your Wireless LAN is created. To review the completed configuration or to make any configuration changes, click the Configure tab when the Wireless LAN is highlighted.

    Click the Configure Tab to View or Edit the Wireless LAN Configuration

Before you configure your Cloudpath system to use the DPSK WLAN you just created, you need to obtain some information about the SmartZone controller that you will need when you perform configuration on your Cloudpath system. Refer to the following section.

Obtaining Information about the SmartZone Controller

You will need the following information when you perform the necessary configuration in Cloudpath.

  • Obtain the Management IP address. Navigate to System > Cluster. In the Control Planes section of the screen, shown below, locate the IP address under "IP (Management and AP Control." Be sure to write down this IP address because you will need it during configuration on your Cloudpath system.

    Obtaining the Management IP Address on SmartZone

  • Enable Northbound Portal Interface Support. Navigate to Systems > General Settings.

    In the Northbound Interface tab, shown below, check the box to enable Northbound Portal Interface Support, then be sure to enter the same User Name and Password that you used for the administrator credentials of the SmartZone Controller. Click OK.

    Note: You will need the these credentials when you perform corresponding configuration on your Cloudpath system.

    Enabling Northbound Portal Interface Support on SmartZone

Now, proceed to Configuring DPSK on Cloudpath to Integrate with SmartZone.