Member ID Status Mode (ID) LED

The member ID status mode (ID) LEDs display the Stack ID or Switch Port Extender (SPX) port extender (PE)

Stack ID: If the switch is configured in traditional stacking mode, this LED displays the stack member ID of the unit within the stack.

Port LEDs are used to display the stack ID from 1 to 12 of each member within the stack.

SPX PE ID: If the switch is configured in SPX mode, this LED displays the PE ID.

Two port LEDs are used to display the ID: Steady green for the first digit and steady amber for the second digit. For example, the LED for port 2 shows steady green and port 7 shows steady amber for PE ID 27. The LED for port 3 shows steady green for two seconds followed by steady amber for two seconds and continues to alternate green and amber for PE ID 33. The LED for port 4 shows steady green and port 10 shows steady amber for PE ID 40.

Refer to the following table to interpret the member ID status mode LED.

LED Color	Status of Hardware	Recommended Action
Steady Green	Port number is the same as the stack ID. Or Port number is the first digit of the PE ID.	None.
Steady amber	Port number is the second digit of the PE ID. Or Port number is 10 and second digit of the PE ID is 0.	None.
Alternating amber and green	First and second digit of the PE ID are the same.	None.

LED Color

Status of Hardware

Recommended Action

Steady Green

Port number is the same as the stack ID.

Port number is the first digit of the PE ID.

None.

Steady amber

Port number is the second digit of the PE ID.

Port number is 10 and second digit of the PE ID is 0.

None.

Alternating amber and green

First and second digit of the PE ID are the same.

None.