Campus Fabric Management

• 1 Campus Fabric Management
  • 1.1 Logging in through the Console Port
  • 1.2 Using the Remote CB Console
    • 1.2.1 PE Console Port Behavior
  • 1.3 Changing the Speed on an SPX Link
    • 1.3.1 Converting 1-Gbps SPX Links on Downstream PEs to 10-Gbps Links
    • 1.3.2 Converting Attached PE Candidate Speed by Physically Disconnecting the Units
  • 1.4 Handling Nonoperational PE Units
  • 1.5 Assigning an ID to a PE Unit
    • 1.5.1 Assigning a PE ID that Has Been Taken
  • 1.6 Replacing a PE Unit
  • 1.7 Replacing PE Units with the Zero-touch or SPX Interactive Utility
  • 1.8 Moving a PE Unit and Retaining Its ID (Manual Methods)
    • 1.8.1 Method 1: Prepare a New Topology by Reconfiguring PE IDs on the CB
    • 1.8.2 Method 2: Allow Suggested ID or Previous Unit ID Assignment
  • 1.9 Removing a PE Ring and Its Configuration
  • 1.10 Configuring SPX Ports and LAGs on a Live System
  • 1.11 Campus Fabric (SPX) Image Upgrade
    • 1.11.1 Disabling or Re-enabling the Auto Image Copy Process for a Campus Fabric (SPX) Configuration
    • 1.11.2 Configuring a TFTP Server for Campus Fabric (SPX) auto image copy
    • 1.11.3 Manual Upgrade of Campus Fabric (SPX) Images Using a Manifest File
  • 1.12 Unconfiguring the CB Stack or PE Units
  • 1.13 CB Stack Merges and Breaks
  • 1.14 Displaying Campus Fabric (SPX) Information
    • 1.14.1 SPX Information in show running-config Output
    • 1.14.2 SPX Information in show configuration Command Output
    • 1.14.3 Displaying Regular Mode Configuration from a PE Unit
    • 1.14.4 Displaying Information with the show spx Command
    • 1.14.5 Using show commands for Operational Analysis
  • 1.15 Campus Fabric mirroring overview
    • 1.15.1 Mirroring in a Campus Fabric domain
  • 1.16 MIB support for Campus Fabric 802.1br SPX configurations