ttg-pdg-profile

Creates or updates the Tunnel Terminating Gateway (TTG) and Packet Data Gateway (PDG) profile configurations.
Syntax
ttg-pdg-profileprofile-name
no ttg-pdg-profileprofile-name

After the ttg-pdg-profile command is entered to enter ttg pdg profile configuration mode, the following configuration syntax is available:

{acct-retryretry-times|acct-retry-timeoutseconds|apn-format-ggsn[dns|string]|apn-oi|default| dhcp-option82 | dhcp-relay | dhcp-server1 ip-address | dhcp-server2 ip-address | nameprofile-name|pdgue-idle-timeoutseconds | realm realm}
{apn{ni|nioi}apn-name{route-type{gtpv1|gtpv2|pdg}}
Command Default

TTG and PDG profiles are not created.

Parameters
profile-name
TTG+PDG profile name.
acct-retryretry-times
Specifies the interval, in minutes, at which the controller will recheck the primary TTG+PDG RADIUS profile, if it is available. The default is 5 minutes with a range of 1 to 10.
acct-retry-timeoutseconds
Sets the timeout period, in seconds, after which an expected response message is considered to have failed.
apn-format-ggsn
Sets the APN format to GGSN.
dns
Uses DNS as the APN format.
string
Uses a string as the APN format.
apn-oi
Enables APN-OI for DNS resolution.
default
Creates or updates default APN configuration.
no-match-realmapn-name
Uses the specified apn-name as the default when no matching is found. Existing APNs are displayed as a choice.
no-realmapn-name
Uses the specified apn-name as the default when no realm is specified. Existing APNs are displayed as a choice.
dhcp-relay
Enables DHCP relay.
dhcp-option82
Enables DHCP option 82.
dhcp-server1 ip-address
Sets DHCP server 1.
dhcp-server2 ip-address
Sets DHCP server 2.
nameprofile-name
Sets the default TTG PDG profile name.
pdgue-idle-timeout
Sets the PDG UE session idle timeout, in seconds.
realmrealm
Creates or updates the default APN for realm.
apn
Creates or updates the APN configuration to allow for overrides of the Network Identifier (NI) or Operator Identifier (OI).
niapn-name
Uses the specified apn-name to override the supplied NI.
nioiapn-name
Uses the specified apn-name to override the supplied OI.
route-type
Specifies a route type.
gtpv1
Specifies the GTPv1 route type.
gtpv2
Specifies the GTPv2 route type.
pdg
Specifies the PDG route type.
Modes

Global configuration mode

Usage Guidelines

Use the no form of this command to delete a TTG+PDG profile.

This command is supported on the SmartZone 300 only.

Examples

The following example creates a TTG+PDG profile named newprofile123 and configures some other parameters. 

device# config
device(config)# ttg-pdg-profile newprofile123
NODE-63(config-ttg-pdg-profile)# acct-retry 6
NODE-63(config-ttg-pdg-profile)# acct-retry-timeout 20
device(config-ttg-pdg-profile)# pdgue-idle-timeout 45
device(config-ttg-pdg-profile)# apn ni ruckus-new
device(config-ttg-pdg-profile-apn)# route-type pdg
Parent topic: Commands Si - Z