Configuring NAT Pool Setting

To configure NAT pool settings
  1. Go to Services > DHCP & NAT > NAT Profiles (DP).
  2. Select the NAT profile from the list and click the Pools tab.
  3. Click Create, the Create Pool Configuration page appears.
  4. Configure the following:
    • General Options

      • Pool Name: Type a name for the NAT pool settings that you want to create.

      • Description: Type a description for the pool settings that you want to create.

    • Policy Options:
      • Policy Type: Select VNI type for Network Segmentation.
    • Translation Options

      • Port Range: Type the port range. Range: 10000 through 65534. For example: 10000-20000.

      • Public Address Range: Type the public address range.

        Note: This public address must not be duplicated with the other public address in the same subnet, which includes applied NAT Profile and vSZ-D's Access and Core Interface Address.

  5. Click OK.
    You have created a NAT pool setting.
Parent topic: Configuring the vSZ Controller to Prepare for Network Segmentation