Mandatory Upgrade Steps from a Pre-08.0.80 Non-UFI Version to a 09.0.10a or Later UFI Version

Upgrading from a pre-08.0.80 non-UFI version to a FastIron 09.0.10a or later UFI version is a two-step upgrade process. For example, if you want to upgrade a stacking unit or a standalone device from FastIron 08.0.70 to FastIron 09.0.10a or later, complete the following steps.

1. Download the 08.0.80f non-UFI using one of the transfer methods listed in File Transfer Method and Commands Required for Upgrading from Pre-08.0.80 Non-UFI Version, and reboot the device with the FastIron 08.0.80f image using the boot system flash primary command. The system uses the FastIron 08.0.80f image. Save the running configuration to the startup configuration using the write memory command.
   Note: Downloading the non-UFI image and rebooting the device is mandatory because it migrates the configured access control list (ACL) configurations without sequence numbers to the new ACL format. The system will otherwise lose the previously configured ACL configuration without sequence numbers while upgrading from a pre-08.0.90 non-UFI version to a UFI version.
2. Copy the FastIron 09.0.10a or later UFI to the primary flash partition using the same method, and reboot the device again.
   Note: The show version command may display a boot code mismatch message after the upgrade.
   Copy the FastIron 09.0.10a or later UFI again to the secondary flash partition to avoid boot image mismatch.

1a) device# copy tftp flash 10.177.16.144 SPR08080f.bin primary
1b) device# copy tftp flash 10.177.16.144 spz10114.bin bootrom

2a) device# copy tftp flash 10.177.16.144 SPR09010aufi.bin primary
2b) device# copy tftp flash 10.177.16.144 SPR09010aufi.bin secondary

or

1) device# copy tftp system-manifest 10.176.220.51 FI08080f_Manifest.txt all-images-primary

2a) device# copy tftp system-manifest 10.176.220.51 FI09010a_Manifest.txt primary
2b) device# copy tftp system-manifest 10.176.220.51 FI09010a_Manifest.txt secondary

1a) device# copy scp flash 10.176.132.13 SPR08080f.bin primary
1b) device# copy scp flash 10.176.132.13 spz10114.bin bootrom

2a) device# copy scp flash 10.176.132.13 SPR09010aufi.bin primary
2b) device# copy scp flash 10.176.132.13 SPR09010aufi.bin secondary

1a) device# copy https flash 10.176.132.132 SPR08080f.bin primary
1b) device# copy https flash 10.176.132.132 spz10114.bin bootrom

2a) device# copy https flash 10.176.132.132 SPR09010aufi.bin primary
2b) device# copy https flash 10.176.132.132 SPR09010aufi.bin secondary

1a) device# copy disk0 flash SPR08080f.bin primary
1b) device# copy disk0 flash spz10114.bin bootrom

2a) device# copy disk0 flash SPR09010aufi.bin primary
2b) device# copy disk0 flash SPR09010aufi.bin secondary