Loading the Flash Code Using SCP
The new flash code must be placed on an SCP-enabled host to which the RUCKUS ICX device has access.
Note: Copying the manifest
file using SCP is not supported.
Note: The FastIron CLI must be used for
the SCP image copy.
- a. Copy the flash code from the SCP-enabled host into the flash memory.
ICX7450-24P Router# copy scp flash 10.176.132.13 SPR08080f.bin primary User name:root Password: Connecting to remote host...... Receiving data (8192 bytes per dot) ................................... Automatic copy to member units: 1 4 SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)... Image copy completed Primary Image file downloaded successfully. SCP transfer to device completed Outbound Connection Closed
b. Copy the flash code to bootrom.
ICX7450-24P Router# copy scp flash 10.176.132.13 spz10114.bin bootrom User name:root Password: Connecting to remote host...... Receiving data (8192 bytes per dot) ........................................................... Automatic copy to member units: 1 4 ..................................................................................................... SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)... Image copy completed ................................................................................................ Done. SCP transfer to device completed Connection Closed
- a. Reload the device and then
immediately upgrade to the UFI. b. Re-copy the 09.0.10a or later UFI to the primary and the secondary flash partition to avoid boot image mismatch.
ICX7450-24P Router# copy scp flash 10.176.132.13 SPR09010aufi.bin primary User name:root Password: Connecting to remote host...... Receiving data (8192 bytes per dot) Image copy completed ICX7450-24P Router# copy scp flash 10.176.132.13 SPR09010aufi.bin secondary