Displaying IPsec Module Information

Some show commands can be used to display information about the status of an installed IPsec interface module and about the current utilization of the module.

Enter the show module command to display module status information.

device# show module

       Module                                         Status Ports Starting MAC
U1:M1  ICX7450-48 48-port Management Module             OK     48   cc4e.248d.f8d0
U1:M2  ICX7400-4X10GF 4-port 40G Module                 OK     4    cc4e.248d.f901
U1:M3  ICX7400-1X40GQ 1-port 40G Module                 OK     1    cc4e.248d.f905
U2:M1  ICX7450-48 48-port Management Module             OK     48   cc4e.248e.4990
U2:M2  ICX7400-4X10GF 4-port 40G Module                 OK     4    cc4e.248e.49c1
U2:M3  ICX7400-SERVICE-MOD Module                       OK     0
U2:M4  ICX7400-1X40GQ 1-port 40G Module                 OK     1    cc4e.248e.49c9
U3:M1  ICX7450-48 48-port Management Module             OK     48   cc4e.248e.4490
U3:M2  ICX7400-4X10GF 4-port 40G Module                 OK     4    cc4e.248e.44c1
U3:M3  ICX7400-1X40GQ 1-port 40G Module                 OK     1    cc4e.248e.44c5
U3:M4  ICX7400-1X40GQ 1-port 40G Module                 OK     1    cc4e.248e.44c9

Enter the show ipsec card-utilization command to display information about the current utilization of the IPsec interface module.

device# show ipsec card-utilization

IPSEC Module     : 1/4, admin: UP

card-utilization :
 Tx pkt count           : 2181783416   Rx pkt Count            : 2181782549
 Tx pkt/sec             : 30104535     Rx pkt/sec              : 30104483
 Tx byte count          : 208735473958 Rx byte Count           : 306526015230
 Tx bytes/sec           : 4166829344   Rx bytes/sec            : 4890915108
 Encrypt In Utilization : 53.75%       Encrypt Out Utilization : 100.00%
 Decrypt In Utilization : 100.00%      Decrypt Out Utilization : 93.24%