Disabling Traps and Syslog Messages for IKEv2 and IPsec

You can disable error traps and syslog messages for Internet Key Exchange version 2 (IKEv2) and IPsec. By default, traps and syslog messages for both IKEv2 and IPsec are enabled.

Use the following commands to disable error traps and syslog messages for IKEv2 and IPsec.

The no snmp-server enable traps command disables error traps for IKEv2 and IPsec.
The following example shows how to disable error traps for IKEv2.
```
device(config)# no snmp-server enable traps ikev2
```
The following example shows how to disable error traps for IPsec.
```
device(config)# no snmp-server enable traps ipsec
```

The no logging enable ikev2 command disables syslog messages for IKEv2.
```
device(config)# no logging enable ikev2
```
Note: To disable only extended logging of IKEv2 packets, use the following command:
```
device(config)# no logging enable ikev2 ikev2-packet
```
Note: To disable only extended logging of IKEv2 events, use the following command:
```
device(config)# no logging enable ikev2 ikev2-extended 
```

The no logging enable ipsec command disables syslog messages for IPsec.
```
device(config)# no logging enable ipsec
```