Configuring a Custom Port Number for Connection to SmartZone

By default, ICX switches use TCP destination port 22 to connect with SmartZone. Use the manager ssh-port command to configure a different port number for connecting with SmartZone.

The following example configures an ICX switch to connect to SmartZone over SSH port 25. A warning message is displayed as shown if a session is already established. You must confirm the configuration update when prompted before the new connection is established. Check configuration status with the show manager status command.

device# configure terminal
device(config)# manager ssh-port
  DECIMAL   Enter a decimal value (Default 22)
device(config)# manager ssh-port 25

device(config)# manager ssh-port 25  <-- Warning message -->
Current session if established will be dropped to establish a new session with port 25.
Are you sure? (enter 'y' or 'n'): y  <-- You must confirm the configuration.
!
!
device(config)# exit

device# show manager status

SYSLOG: <14> May 08 08:45:00 ICX CLI CMD: "show manager status" by super user from console
============    MGMT Agent State Info     ===================

Manager mode: SZ
Config Status:Enabled Operation Status:Enabled
State:SSH CONNECTED  Prev State:SSH CONNECTING   Event:SZ_SSH_CONNECT_EVENT
 
BSICLOUD Status         : Disabled
 
SWR Host                : sw-registrar.ruckuswireless.com
SWR List                : None
SWR fqdn                : None
DNS List                : None
 
Active FQDN List        : None
Backup FQDN List        : None
Active List             : 10.177.19.14
Backup List             : None
Active List IPV6        : 2001:df3:80d:826f::114
Backup List IPV6        : None
DHCP Option 43          : No
DHCP Opt 43 List        : None
DHCPV6 LIST             : None
Merged List             : 10.177.19.14 2001:df3:80d:826f::114
SZ IP Used              : 10.177.19.14
Port List               : None
Server Port Used        : 443                                     
Query Status            : APPROVED
 
SSH Tunnel Status -:
Tunnel Status             : Established
SSH Port                  : 22
CLI IP/Port               : 127.255.255.253/57316
SNMP IP/Port              : 127.255.255.254/10825
Syslog IP/Port            : 127.0.0.1/20514
HTTP CLIENT IP/Port       : 127.255.255.252/36431
HTTP SERVER IP/Port       : 127.0.0.1/5080