You can prevent a specific interface from participating in
dynamic port-profile assignments to maintain configuration stability on critical ports.
Excluding an interface prevents any dynamic port profile changes from applying until
you
remove the setting. Complete the following steps to exclude the interface.- Enter global configuration
mode.
device# configure terminal
- Enter Interface configuration
mode for the port you want to exclude.
device(config)# interface ethernet 1/1/2
- Enter the
exclude
port-profile command to prevent the interface from being modified
by any dynamic port profile assignment.
device(config-if-e1000-1/1/2)# exclude port-profile
The following example excludes interface ethernet 1/1/2 from dynamic port profile
assignments.
device# configure terminal
device(config)# interface ethernet 1/1/2
device(config-if-e1000-1/1/2)# exclude port-profile
The following example restores dynamic behavior on the interface by removing the
exclusion.
device# configure terminal
device(config)# interface ethernet 1/1/2
device(config-if-e1000-1/1/2)# no exclude port-profile