Setting the sFlow Sampling Rate for a LAG

Complete the following steps to set the sFlow sampling rate for a LAG.
  1. Enter the global configuration mode. 
    device# configure terminal
  2. Create a LAG. 
    device(config)# lag blue static id 1
  3. Add ports to the LAG. 
    device(config-lag-blue)# ports ethernet 1/3/1
  4. Set the sFlow sampling rate. 
    device(config-lag-blue)# sflow sample 512

The following example sets the sFlow sampling rate for a LAG. 

device# configure terminal
device(config)# lag blue static id 1
device#(config-lag-blue)# ports ethernet 1/3/1
device#(config-lag-blue)# sflow sample 512

For a keep-alive LAG, you need to configure sFlow sampling at the interface level and not within the LAG configuration. 

device#(config-lag-test)# interface ethernet 1/7/8
device#(config-if-e1000-1/7/8)# sflow sample 512
device#(config-if-e1000-1/7/8)#
Parent topic: Configuring a LAG