Configuring Resilient Hashing

To configure resilient hashing, perform the following tasks:

Add ports to the LAG.

device(config-lag-test)# ports ethernet 1/1/1 to 1/1/3

Enable resilient hashing on the LAG.
```
device(config-lag-test)# trunk-type resilient-hash
```

The following example enables resilient hashing on the "test" LAG.

device(config)# lag test static id 11   
device(config-lag-test)# ports ethernet 1/1/1 to 1/1/3
device(config-lag-test)# trunk-type resilient-hash

The following warning messages are displayed when symmetric hashing and resilient hashing exist together in the system.

Scenario 1: You configure symmetric load balancing on a device that also has resilient hashing enabled.
```
Warning: system has resilient-hash lags, symmetric hashing may not work for RH lags.
```

Scenario 2: You deploy a resilient hashing LAG on a device that already has symmetric hashing enabled.
```
Warning: system has symmetric hashing enabled, symmetric hashing may not work on resilient-hash lag <LAG_NAME>
```