Enabling the Flooding of Unregistered IPv6 Multicast Frames Globally
The following task enables the flooding of
initial packets for unregistered IPv6 multicast groups until hardware entries are
programmed. Once the hardware entries are programmed, packets are dropped for unregistered
multicast groups.
-
Note: If SDVoE is enabled for a VLAN, it must be disabled before attempting to enable the flooding of unregistered IPv6 Multicast frames.Enter global configuration mode.
- Enable the flooding of unregistered IPv6 Frames.
The following example enables the flooding of unregistered IPv6 multicast frames globally.
device# configure terminal device(config)# ipv6 multicast flood-unregistered
The following example disables the flooding of unregistered IPv6 multicast frames globally.
device# configure terminal device(config)# no ipv6 multicast flood-unregistered