Configuring the MLD Snooping Mode and Version Globally

MLD mode and version can be configured on RUCKUS devices in global configuration mode.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Globally set the MLD mode to active. 
    device(config)# ipv6 multicast active
    If you do not specify the active keyword, the default mode is passive.
  3. Globally set the MLD version to version 2. 
    device(config)# ipv6 multicast version 2
    If you do not specify an MLD version, the default version is MLDv1.

The following example globally sets the device to run IPv6 multicast version 2 in active mode. 

device# configure terminal
device(config)# ipv6 multicast active
device(config)# ipv6 multicast version 2
Parent topic: MLD Snooping Configuration